RGH Freeze at Xbox Logo, Xellous Reloaded works fine

G

GT Mocha

Junior Member
Jan 8, 2012
19
0
BL4K3Y said:
My apologies, I misinterpreted that part.

Well, I am sure X Consoles will replace the item as long as it is still in warranty :).
Click to expand...
I purchased it on the 25th of February and they have a 30 return policy so I should be good. However I don't have the original box still :/

Anyways back to the OP is there anything I can do?
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
Writing with NandPro is the only suggestion I have at this stage, unless Martin or somebody else thinks otherwise.

Are your wires routed away from the coils so as to avoid electrical interference?
 
G

GT Mocha

Junior Member
Jan 8, 2012
19
0
Okay, so my Nand-X is showingin Device Manager after I reset it. But still there are no shorts AT ALL and all I get is "Can not continue" the same as before. Ill be uploading pics in a few minutes.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
GT Mocha said:
Code: 
===================================================
Sunday, March 18, 2012 6:10:11 PM



No Updates Found


Checking Files
Finished Checking Files
Initializing Nand..
Comparing...
Nands are the same
Initializing Nand..
CpuKey is Correct
Key already Exists
Load Files Initiliazation Finished
Initializing Nand..
CpuKey is Correct
Key already Exists
Started Creation of the xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.01.421
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
C:\Users\Brandon\Desktop\For martin\077649283207\nandflash.bin image built, info:
---------------------------------------------------------------
Console  : Falcon
NAND size: 16MiB
Build    : Glitch
Xell     : power on console with console eject button
CPU Key  : C38FDE063A27E6A29EE308CD70DXXXX
1BL Key  : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key  : ADD09D5B68868B8AE3CA8C4F8965XXXX
CF LDV   : 7
KV type  : type2 (hashed)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------

press <enter> to quit...

Saved to C:\Users\Brandon\Desktop\For martin\077649283207
Image is Ready
INFO: You can write the resulting image to the nand using this app's Write Nand button
However if you wish, you may copy the "Nandflash.bin" and "Xenon.elf" to a USB stick.
Place that in console and boot the console using the eject button.
(this will use rawflash and overcome any bad blocks you may have on your nand)
Click to expand...
That's not the log I needed.

There's a nandflash.bin.log in the same location as your NAND. Can you attach it?

Also, what values do you get from the NAND points? refer to my NAND-x guide for assistance.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
BL4K3Y said:
I can't see that image very clearly but the blue and green wires on J2B1 look like they need swapping over, see this image.
Click to expand...
Spot on Blakey - I didn't even look at the wires colouring.
 
I

Ir0nman

Full Member
Mar 13, 2011
59
0
I feel that his console freezing is due to new bad blocks showing up after he rewrote his nand the first time and they were never remapped properly because he was still feeding his original dump. He needs to A) remap manually and rewrite or B) feed one of the builders his dump with the 3 bad blocks which will remap for him. Once the blocks are properly remapped he could then A) write with his NandX or B) Use RawFlash v4 to write the image back. I could walk you thru it if you PM your contact details for live messaging (ie. AIM, GTalk, MSN etc.) I'm very confident that this is the problem.
 
G

GT Mocha

Junior Member
Jan 8, 2012
19
0
Log:
Code: 
---------------------------------------------------------------
     xeBuild v1.01.421
---------------------------------------------------------------
building glitch image
data directory overridden from command line to 'xeBuild\14719'
per build directory overridden from command line to 'xeBuild\data'
file name overridden from command line to 'C:\Users\Brandon\Desktop\For martin\077649283207\nandflash.bin'

------ parsing user ini at '.\xeBuild\data\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x14f bytes in memory
loading cpukey.txt from C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\cpukey.txt
CPU Key set to: 0xC38FDE063A27E6A29EE308CD70DDFA5A
setting 1blkey from ini: 0xDD88AD0C9ED669E7B56794FB68563EFA
1BL Key set to: 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983)
xex Key set to: 0x20B185A59D28FDC340583FBB0896BF91 sum: 0x800 (expects: 0x800)
Using patchsmc option (ini file)

------ parsing ini at '.\xeBuild\14719\_glitch.ini' ------
ini version 14719

ini: label [falconbl] found
found (1) 'cb_5771.bin' crc: 0x859140f0
found (2) 'none' crc: 0x00000000
found (3) 'cd_8453.bin' crc: 0x25e0acd0
found (4) 'ce_1888.bin' crc: 0xff9b60df
found (5) 'cf_14719.bin' crc: 0x31764aae
found (6) 'cg_14719.bin' crc: 0x2b990f2a

ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0x79fa8ef9
found (2) 'bootanim.xex' crc: 0x4708ac41
found (3) 'createprofile.xex' crc: 0x17d7eeef
found (4) 'dash.xex' crc: 0xc331818a
found (5) 'deviceselector.xex' crc: 0xce0a6ac4
found (6) 'gamerprofile.xex' crc: 0x3d6fde71
found (7) 'hud.xex' crc: 0xfb9af532
found (8) 'huduiskin.xex' crc: 0x59c8f99e
found (9) 'mfgbootlauncher.xex' crc: 0x30028379
found (10) 'minimediaplayer.xex' crc: 0xea50ae99
found (11) 'nomni.xexp' crc: 0xd1e81135
found (12) 'nomnifwk.xexp' crc: 0x6311da91
found (13) 'nomnifwm.xexp' crc: 0x03b32644
found (14) 'SegoeXbox-Light.xtt' crc: 0x086eb344
found (15) 'signin.xex' crc: 0x09f66fc4
found (16) 'updater.xex' crc: 0x9dc378a8
found (17) 'vk.xex' crc: 0x8ad4198e
found (18) 'xam.xex' crc: 0xc1ee0989
found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (20) 'xenonclatin.xttp' crc: 0x7a507ad1
found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (22) 'xenonjklatin.xttp' crc: 0x945b7092
found (23) 'ximecore.xex' crc: 0x709614d6
found (24) 'ximedic.xex' crc: 0x1d992bfb
found (25) 'ximedic.xexp' crc: 0xa1284e82

ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'fcrt.bin' crc: 0x00000000
found (5) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------

output name overridden to: C:\Users\Brandon\Desktop\For martin\077649283207\nandflash.bin


------ Checking C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\nanddump.bin ------
Loading NAND dump (0x28ee70 bytes)...done!
Detecting NAND controller type from dump data...
    NAND dump is from a small block machine
    NAND dump uses small block controller
parsing dump into user and spare...
bad block at 0x1aa (raw offset 0x6dd400), block ignored
block 0x1aa was remapped to block 0x3ff at remap instance 0
done!
cleaning up stray remaps
done!
--remap summary--
0: source: 0x01aa dest: 0x03ff
-----------------
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
CF slot 0 decrypted ok LDV 0x07 Pairing: 0xa4ae76
setting LDV from image to 7
setting pairing data from image to 0xa4ae76
MobileB.dat found at page 0x3d80, size 2048 (0x800) bytes
MobileC.dat found at page 0x36a0, size 512 (0x200) bytes
MobileD.dat found at page 0x3700, size 2048 (0x800) bytes
MobileE.dat found at page 0x73a0, size 1536 (0x600) bytes
seeking security files...fsroot found at page 0x3520 raw offset 0x6d9200
crl.bin found in sector 0x20e size 0xa00...verified! Will use if external file not found.
dae.bin found in sector 0x3c0 size 0x7090...verified! Will use if external file not found.
extended.bin found in sector 0x1b0 size 0x4000...verified! Will use if external file not found.
secdata.bin found in sector 0x1a8 size 0x400...verified! Will use if external file not found.
Writing initial header to flash image

------ Loading bootloaders and required security files ------
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\smc.bin failed, using smc.bin from nand dump
reset smc load address to 0x1000 size 0x3000
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\kv.bin failed, using kv.bin from nand dump
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\cb_5771.bin (0x9340 bytes)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\cd_8453.bin (0x5780 bytes)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\ce_1888.bin (0x5606a b pad 0x56070 b)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\xell-gggggg.bin (0x40000 bytes)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\cf_14719.bin (0x4560 bytes)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\cg_14719.bin (0x664aa b pad 0x664b0 b)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\bin\patches_fat.bin (0x700 bytes)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
SMC config info:
------------------
Target temps: Cpu:  80øC Gpu:  75øC Edram:  78øC
Max temps   : Cpu: 100øC Gpu: 100øC Edram: 102øC
Cpu Fan     : (auto)
Gpu Fan     : (auto)
MAC Address : 00:1d:d8:b2:17:ec
AVRegion    : 0x00000100 (NTSC-M)
GameRegion  : 0x00ff (NTSC/US)
DVDRegion   : 1
resetKey    : XXRU
---------------------
Checking for smc config data patches
smc config was not patched
---------------------
done!
patch slot offset reset to: 0xb0000

------ Patching BLs and modifying patches ------
Patching patches...
    Default patch offset 0x000c0010 not changed
    Patching patches for alt power reason
Patches patched!
Patching BLs...Done!

------ Encrypting and finalizing bootloaders ------
encoding smc.bin size 0x3000
SMC checksum: 1d0c613e
known clean SMC found, type: Falcon v3.1(1.06)
patching smc at offset: 0x12a3
SMC hacked successfully
encoding kv.bin size 0x4000
decrypted keyvault has been set for reference
encoding cb_5771.bin size 0x9340
CB 5771 seq 0x01070058 type: 0x01 cseq: 0x07 allow: 0x0058
    expected fuses:
    fuseset 00: C0FFFFFFFFFFFFFF
    fuseset 01: 0F0F0F0F0F0F0FF0
    fuseset 02: 000000F000000000 (sequence)
    fuseset 02: 000F000000000000 (allow cseq 4)
    fuseset 02: 0000F00000000000 (allow cseq 5)
    fuseset 02: 000000F000000000 (allow cseq 7)
encoding cd_8453.bin size 0x5a60
encoding ce_1888.bin size 0x56070
encoding xell-gggggg.bin size 0x40000
encoding cf_14719.bin size 0x4560
encoding cg_14719.bin size 0x664b0
encoding patches_fat.bin size 0x3f0
done!

------ Adding bootloaders to flash image ------
adding smc.bin at raw offset 0x00001000 len 0x3000 (end 0x4000)
adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)
adding cb_5771.bin at raw offset 0x00008000 len 0x9340 (end 0x11340)
adding cd_8453.bin at raw offset 0x00011340 len 0x5a60 (end 0x16da0)
adding ce_1888.bin at raw offset 0x00016da0 len 0x56070 (end 0x6ce10)
adding xell-gggggg.bin at raw offset 0x00070000 len 0x40000 (end 0xb0000)
adding cf_14719.bin at raw offset 0x000b0000 len 0x4560 (end 0xb4560)
adding cg_14719.bin at raw offset 0x000b4560 len 0x664b0 (end 0xc0000, rest in fs)
adding patches_fat.bin at raw offset 0x000c0010 len 0x3f0 (end 0xc0400)
Fixing up FS table...done!
Writing CG patch slot overflow data to sysupdate.xexp1 at raw offset 0xd0000...done!

------ adding 25 firmware files ------
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\aac.xexp (0x14000 bytes) (crc32: 0x79fa8ef9 ini: 0x79fa8ef9)
    adding as aac.xexp1 at raw offset 0x12aa10 len 0x00014000 (end 0x0013ea10)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\bootanim.xex (0x61000 bytes) (crc32: 0x4708ac41 ini: 0x4708ac41)
    adding as bootanim.xex at raw offset 0x140000 len 0x00061000 (end 0x001a1000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\createprofile.xex (0xc000 bytes) (crc32: 0x17d7eeef ini: 0x17d7eeef)
    adding as createprofile.xex at raw offset 0x1a1000 len 0x0000c000 (end 0x001ad000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\dash.xex (0x63a000 bytes) (crc32: 0xc331818a ini: 0xc331818a)
    adding as dash.xex at raw offset 0x1b0000 len 0x0063a000 (end 0x007ea000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\deviceselector.xex (0x9000 bytes) (crc32: 0xce0a6ac4 ini: 0xce0a6ac4)
    adding as deviceselector.xex at raw offset 0x7ea000 len 0x00009000 (end 0x007f3000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\gamerprofile.xex (0x1b000 bytes) (crc32: 0x3d6fde71 ini: 0x3d6fde71)
    adding as gamerprofile.xex at raw offset 0x7f5000 len 0x0001b000 (end 0x00810000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\hud.xex (0x1e000 bytes) (crc32: 0xfb9af532 ini: 0xfb9af532)
    adding as hud.xex at raw offset 0x813000 len 0x0001e000 (end 0x00831000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\huduiskin.xex (0x13000 bytes) (crc32: 0x59c8f99e ini: 0x59c8f99e)
    adding as huduiskin.xex at raw offset 0x832000 len 0x00013000 (end 0x00845000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\mfgbootlauncher.xex (0x8000 bytes) (crc32: 0x30028379 ini: 0x30028379)
    adding as mfgbootlauncher.xex at raw offset 0x847000 len 0x00008000 (end 0x0084f000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\minimediaplayer.xex (0xc000 bytes) (crc32: 0xea50ae99 ini: 0xea50ae99)
    adding as minimediaplayer.xex at raw offset 0x850000 len 0x0000c000 (end 0x0085c000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\nomni.xexp (0xc800 bytes) (crc32: 0xd1e81135 ini: 0xd1e81135)
    adding as nomni.xexp1 at raw offset 0x85c000 len 0x0000c800 (end 0x00868800)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\nomnifwk.xexp (0x2000 bytes) (crc32: 0x6311da91 ini: 0x6311da91)
    adding as nomnifwk.xexp1 at raw offset 0x868800 len 0x00002000 (end 0x0086a800)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\nomnifwm.xexp (0x5000 bytes) (crc32: 0x03b32644 ini: 0x03b32644)
    adding as nomnifwm.xexp1 at raw offset 0x86e000 len 0x00005000 (end 0x00873000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\SegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0x086eb344 ini: 0x086eb344)
    adding as SegoeXbox-Light.xtt at raw offset 0x875000 len 0x00006000 (end 0x0087b000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\signin.xex (0x16000 bytes) (crc32: 0x09f66fc4 ini: 0x09f66fc4)
    adding as signin.xex at raw offset 0x87e000 len 0x00016000 (end 0x00894000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\updater.xex (0x7000 bytes) (crc32: 0x9dc378a8 ini: 0x9dc378a8)
    adding as updater.xex at raw offset 0x896000 len 0x00007000 (end 0x0089d000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\vk.xex (0x9000 bytes) (crc32: 0x8ad4198e ini: 0x8ad4198e)
    adding as vk.xex at raw offset 0x89f000 len 0x00009000 (end 0x008a8000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\xam.xex (0x236000 bytes) (crc32: 0xc1ee0989 ini: 0xc1ee0989)
    adding as xam.xex at raw offset 0x8a9000 len 0x00236000 (end 0x00adf000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)
    adding as xenonclatin.xtt at raw offset 0xae2000 len 0x0011b000 (end 0x00bfd000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)
    adding as xenonclatin.xttp1 at raw offset 0xbff000 len 0x00018000 (end 0x00c17000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)
    adding as xenonjklatin.xtt at raw offset 0xc18000 len 0x001a8000 (end 0x00dc0000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\xenonjklatin.xttp (0x7000 bytes) (crc32: 0x945b7092 ini: 0x945b7092)
    adding as xenonjklatin.xttp1 at raw offset 0xdc0000 len 0x00007000 (end 0x00dc7000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\ximecore.xex (0x15000 bytes) (crc32: 0x709614d6 ini: 0x709614d6)
    adding as ximecore.xex at raw offset 0xdc7000 len 0x00015000 (end 0x00ddc000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)
    adding as ximedic.xex at raw offset 0xddd000 len 0x00090000 (end 0x00e6d000)
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\14719\ximedic.xexp (0x2800 bytes) (crc32: 0xa1284e82 ini: 0xa1284e82)
    adding as ximedic.xexp1 at raw offset 0xe70000 len 0x00002800 (end 0x00e72800)

------ adding 5 security files ------
<- Processing crl.bin ->
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\crl.bin (0xa00 bytes)
crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success!
    adding as crl.bin at raw offset 0xe74000 len 0x00000a00 (end 0x00e74a00)

<- Processing dae.bin ->
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\dae.bin (0xad30 bytes)
dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key...
success!
    adding as dae.bin at raw offset 0xe78000 len 0x0000ad30 (end 0x00e82d30)

<- Processing extended.bin ->
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\extended.bin (0x4000 bytes)
    adding as extended.bin at raw offset 0xe84000 len 0x00004000 (end 0x00e88000)

<- Processing fcrt.bin ->
    fcrt.bin not found and not required by keyvault, skipped

<- Processing secdata.bin ->
reading C:\Users\Brandon\Desktop\Dev\J-Runner\xeBuild\.\xeBuild\data\secdata.bin (0x400 bytes)
    adding as secdata.bin at raw offset 0xe88000 len 0x00000400 (end 0x00e88400)

------ checking for Mobile*.dat ------
MobileB.dat found, adding from nanddump.bin
    adding MobileB.dat as type 0x31 at raw offset 0xe8c000 len 0x800 (end 0xe8c800)
MobileC.dat found, adding from nanddump.bin
    adding MobileC.dat as type 0x32 at raw offset 0xe90000 len 0x200 (end 0xe90200)
MobileD.dat found, adding from nanddump.bin
    adding MobileD.dat as type 0x33 at raw offset 0xe94000 len 0x800 (end 0xe94800)
MobileE.dat found, adding from nanddump.bin
    adding MobileE.dat as type 0x34 at raw offset 0xe98000 len 0x600 (end 0xe98600)

------ adding smc_config.bin ------
adding smc config to offset 0x00f7c000, len 0x400

------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image...done!
calculating ECD bytes and assembling raw image...done!
remapping 1 blocks
    copying 0x4200 bytes of LBA 0x1aa to block 0x3ff...zero fill origin...done!
done!
writing file 'C:\Users\Brandon\Desktop\For martin\077649283207\nandflash.bin' to disk...done!
C:\Users\Brandon\Desktop\For martin\077649283207\nandflash.bin written OK

---------------------------------------------------------------
C:\Users\Brandon\Desktop\For martin\077649283207\nandflash.bin image built, info:
---------------------------------------------------------------
Console  : Falcon
NAND size: 16MiB
Build    : Glitch
Xell     : power on console with console eject button
CPU Key  : C38FDE063A27E6A29EE308CD70DDFA5A
1BL Key  : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key  : ADD09D5B68868B8AE3CA8C4F896567CC
CF LDV   : 7
KV type  : type2 (hashed)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Updated Pics:
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
I've removed the pics as they're too big for forum posting. We have attachments here which you can use. Just crop/resize as needed.

Take your resulting nandflash.bin image and flash using flash360 (app on the console itself).
 
G

GT Mocha

Junior Member
Jan 8, 2012
19
0
Martin C said:
I've removed the pics as they're too big for forum posting. We have attachments here which you can use. Just crop/resize as needed.

Take your resulting nandflash.bin image and flash using flash360 (app on the console itself).
Click to expand...
Can I use it from Xell? I can't get to the dashboard remember?
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
of course - are you still not able to read/write to the NAND even after getting your green and blue wires the right way around?

Have you tried soldering to the underside connections of the points instead?
 
G

GT Mocha

Junior Member
Jan 8, 2012
19
0
BL4K3Y said:
You can either use XeLL or NandPro.

Did you swap the green and blue wires around for your NAND-X?
Click to expand...
Martin C said:
of course - are you still not able to read/write to the NAND even after getting your green and blue wires the right way around?

Have you tried soldering to the underside connections of the points instead?
Click to expand...
I swaped the wires as advised, still got "Can not continue". Soldered to the bottom, still got can not continue.
 
I

Ir0nman

Full Member
Mar 13, 2011
59
0
Your welcome GT Mocha.

Problem was original dump had 1 bad block when he had installed FSD 2 more bad blocks were created. Using his original dump to build would never remap the new bad blocks. On top of that he had a bad block at 3FF. I don't think any of the builders handles this issue correctly with a bad block being in the remapping area. So whatever was remapped to 3FF I moved to 3FD and it worked. Glad I could help and maybe this will help someone in the future.
 
  • Like
Reactions: Martin C
X

XeX_DuBwoofer_x

Full Member
Dec 8, 2011
70
0
Hastings, UK
GT Mocha said:
Well I think I need to send my NandX back to Xconsoles too, because I get "Looking for usb, cannot continue" and it isn't detected even though I have the drivers installed. I also tried on 2 other PC's and 5 other boxes and got the same error, I looked over my soldering too many times to count, and there were absolutely no shorts at all. So now I'm really in a mess, I no longer have a nand flasher and the only thing I can use to read/write is xell reloaded.

What should I try next?
Click to expand...
i've had this issue, download the tools like jrunner etc on a pc running windows xp and the plug the nand-x in and install drivers and should work, solved my issue if not try the reset button ontop
 
You must log in or register to reply here.