Front of Xbox for LCD

[jlockett]

How do you take the fron of the Xbox so I can drimmel the front of it?

Do I have to cut the metal behind it or just insulate the back of the lcd?

Do i just glue the edges to the Xbox> I see there are holes on the corners of the lcd but no screws in the xbox.

Please help.

Thanks.

 

[halomaster7777]

Use a flat head skrew driver and just slide it in the notch on the side of the xbox about 1 inch from the front, and pop it off

 

[Falc0]

Haha, or you can be lazy and NOT take it off. I didn't take it off and nothing of mine got ruined. As long as you're careful you should be fine but if you do not trust your own carefulness then do what halomaster7777 said.

 

[TokenUser]

Get a can of compressed air. Turn the can UPSIDE down, and spray the liquid through the nozzle tube in behind the switch. I t should freeze the sticky pad, and make it easier to remove. A little isopropyl alcohol will clean up the remainder of the pad.