Front X3 memory switch/LED panel

A

arson

Noob Account
Nov 18, 2004
8
0
USA
Not sure how many of you have had this problem, but here goes... I've done several installs of the X3 for some of my co-workers (great system btw, fairly easy to do and fairly user friendly) and since we work rotating 24hr shifts, our Xbox's get moved to and from work a lot. Less than 2 weeks after doing one mod the front panel had a problem. The connectors on the panel (the one the two bundles of wires plug into) broke off... The one had it's solder come undone where all the connection touch the board, and the other one broke it's solder points. Now the other boxes haven't had any problems but I'm looking for ways to support those connectors. As it is with the wires plugged in and all those connectors are raised off the surface of the xbox and are a ways down from the front panel. This creates a nice potential to break them with just a little bit of pressure while it's in a bag or being moved to and from. I'd like some ideas on how to beef that area up or ideas for a cover over those connectors so they can't (well minimize the chance) break.

I see the Pro Switch and while that's a nice change, for the extra cost I don't see too many people changing, at least the folks around here.


Thanks in advance...
 
B

BillyF

do you really need to have the external switches plugged in ?


My external switches are in a box somewhere cause i never stuck it on the front of my box :D
 
S

Sephiroth

Full Member
Nov 21, 2003
55
0
DVD KEY

Hello, I have two xbox's with BenQ drives

XBOX 1:
has a broken BenQ dvd drive that does'nt read games etc. I have used a multimetre and it still does'nt work.

XBOX 2:
has a flashed BenQ drive with LT1.2 that keeps freezing (I have already ordered a repair kit).

SO HERES THE QUESTION:

Can I transfer the DVD Key from XBOX 2 over to XBOX 1 Whilst still keeping the flashed LT1.2 Firmware on the Drive and how do I do this using jungleflasher PLEASE HELP LOL, I am halfway through Dead Rising 2 and in so much mental pain :(
 
R

ReMix

Console Freak
Nov 4, 2003
3,138
0
Re: DVD KEY

1. extract key from xbox 1 benq

2. allow jungleflasher to autospoof

3. benq unlock xbox 2, flash xbox 1 autospoofed firmware to #2

this is done assuming you have saved the key from benq #2 already so that you can put a different drive in it when you get the xbox fixed
 
You must log in or register to reply here.