LITEON DG-16D2S Froze during Flash !!!!

[Angell1028]

I was flashing my Liteon DG-16D2s and during the liteon erase step the screen just froze.. So now i cant get my drive to show up in jungleflasher, what do i do to fix it ??? Thanks

 

[swan.bag]

intro the drive power cycle then should be ok to write as long as you got the key

 

[Angell1028]

What do u mean intro the drive power cycle ? How do i do that. thanks for responding, i really appreciate it. Im so lost right now

 

[swan.bag]

what tools are you using to flash?

 

[Angell1028]

I am using a ck3 pro 3 and the probe 3 but i already probed it and i have the files but it just froze during the liteon erase step.

 

[swan.bag]

disconnect and reconnect drive load dummy.bin as source fw and autoload lt fw then press MTKflash32 tab "intro/device id" press that power off and on ck3 then you should be ok to erase and write the drive

 

[Angell1028]

But i cant get the drive to show up in jungleflasher. Doesnt it need to show up first or no ?

 

[swan.bag]

no it wont at min but that is recovery method

 

[Angell1028]

Ok thanks, ill give it a shot. Thanks u so much, i really appreciate your help

---------- Post added at 22:29 ---------- Previous post was at 22:21 ----------

Ok everything is going good until i click write and it says " Drive returned invalid status "

 

[Angell1028]

Every time i try to write it says Drive returned Invalid Status.. It says invalid status 0x80 in the report. Anything i can do to fix it ??

 

[ataroreh8132]

When you power cycle, try do it in a quick succession?

 

[Angell1028]

and when it tries to spoof it says "serial info not copied "

---------- Post added 19th October 11 at 00:09 ---------- Previous post was 18th October 11 at 23:59 ----------

Ive tried : ( It says the same thing every time. Thanks for the help

 

[noipi]

open jungleflasher(newest version), click the firmware tool32 TAB then click "open source Firmware" select your dummy.bin, after choosing your dummy.bin, it will popup the "loading source" just click yes(be sure that the right firmware are there in FIRMWARE folder), after loading the firmware(ltplus2.0) go to tab MTK flash32. HERE is the crucial point..click the 'LITE-on Erase bar , go on what it says when turnoff for 1sec..then wait to finish, after that go directly to "WRITE" bar. then wait for the instructions of jungleflasher, when finish, your good to go.

sorry for my english asian guy.

 

[Angell1028]

Thats exactly what i have done. I just keep trying but i get nothing when i click write...

 

[noipi]

you need to look for Lite-On Erase on the MTK Flash 32 Tab of JungleFlasher

you need to hit that button then power cycle the drive

this will give you the 0x72

read again the TUTORIAL of jungleflasher

-regards

 

[Angell1028]

It says " drive returned status 0x0 " and " Serial flash found with Status 0x72 " then i click write and it says " Drive returned invalid status of 0x80 " Every time. Thanks

 

[noipi]

please post jungleflasher log.

**what version of jungleflasher you are using?

 

[Angell1028]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.89 Beta (284)
Session Started Wed Oct 19 00:55:25 2011

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 9 I/O Ports.
Found 0 Com Ports.
Found 5 windows drives A: C: D: E: F:
Found 1 CD/DVD drives D:

Loading firmware file C:\Users\Brenda\Desktop\Eriks Dummy Files\Dummy.bin
MD5 hash: 913ce1507b28db0d858ee65939e1e00b
Inquiry string found
Identify string found
Drive key @ 0xA030 3320512C9CA3C24AA6204BF582CC177F
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Auto-Loading firmware file E:\iXtreme_LT_Plus_2.0_SLIM_XBOX360-iND\JungleFlasher v0.1.89 Beta (284)\firmware\LTPlus-025-v2.0.bin
MD5 hash: 0264149996f783b54629c1598072e50e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied
Sending Vendor Intro to port 0xD8B0
Status 0x80
Re-sending Vendor Intro:
....
Serial flash found with Status 0x72

Sending Device ID request to port 0xD8B0
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Sending Lite-On-Erase request to port 0xD8B0
..............
Drive returned Status 0x0
.....
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0xD8B0
Invalid Status 0x80

 

[noipi]

there is a problem with your sata port, look for the file in your windows/system32 "viamraid.sys", uninstall then restart. You don't have a x360USBPRO??

regards

 

[ataroreh8132]

Are you flashing from stock to lt 2.0 or CFW to Lt 2.0? Try to use ofw (your stock FW for your liteon) on target and then go to MTK32 hit LO-erase>powers cycle and see if that will let you write?