LITEON 0225 fw for 0225

[urban999]

hi all i believe i have messed up can you just had your key to the 0225 fw or does it need the serial identify and inquiry bins i think i mixed two fws up so got the wrong data but the correct key for the drive any help will be greatly appreciated

cheers urban

 

[bandit123]

in jungleflasher go to key database ur key is in there

 

[BL4K3Y]

hi all i believe i have messed up can you just had your key to the 0225 fw or does it need the serial identify and inquiry bins i think i mixed two fws up so got the wrong data but the correct key for the drive any help will be greatly appreciated

cheers urban

No, as long as you have the drive key you are fine. Do what bandit123 said to get your key and just spoof it into the correct iXtreme firmware for your drive.

 

[CableBro]

There is one issue thats been happening though. If you dont have your calibration data you CAN experience "Play DVD" errors. You will have to hexedit some posted values in order to fix this.

 

[urban999]

ok thanks all one problem lol i have no experiance at all with hexediting and is there a chance it can be the laser thats gone will check the cooler of the laser shortly

cheers urban

 

[BL4K3Y]

CableBro is correct, see this thread (there is an attachment at the bottom). I would check that first before attempting to replace the laser.

 

[CableBro]

This thread has a tutorial on how to hexedit the fw to try some calibration values.

http://www.team-xecuter.com/forums/showthread.php?t=68031

 

[urban999]

ok ty trying now i make afew and report which one works for me cheers

 

[urban999]

ok so im this far thought
01 04 01 00 02 01 00 17 02 01 53 54 04 01 05 01 mod 1 non working
01 04 01 00 02 01 00 1A 02 01 53 54 04 01 05 01 mod 2 non working
01 04 01 00 02 01 00 1C 02 01 53 54 04 01 05 01 mod 3 non working
01 04 01 00 02 01 00 1E 02 01 53 54 04 01 05 01 mod 4 non working
01 04 01 00 02 01 00 1F 02 01 53 54 04 01 05 01 mod 5 non working
01 04 01 00 02 01 00 23 02 01 53 54 04 01 FF FF mod 6 trying
01 04 01 00 02 01 00 26 02 01 53 54 04 01 05 01 mod 7
01 04 01 00 02 01 53 54 04 01 05 01 FF FF FF FF mod 8

my question is can people please post there 0225 drive and what cal data is working for them

i got this one from my drive OFW but it now open tray on me after trying to read the disc
kamikaze hack so no longer can get a new dump of OFW
01 04 01 00 02 01 00 18 02 01 53 54 04 01 05 01 my cal data

cheers urban

 

[x360ccm]

did you follow this step by step

http://www.team-xecuter.com/forums/showthread.php?p=419422

if you saved your Dummy file if so then thats all you need.

just to make sure re dump it as you said u mixed two fws up so got the wrong data:rolleyes2:

 

[urban999]

yes step by step mate make separate fws with the diffrent cal data
i believe my dummy as been mxed up somehow with another drives identify and inquiry and serial bin would that make any diffrents to it running the only one i know for sure is correct is the key.bin
cheers for the help urban

 

[x360ccm]

so you dont have you orig dummy.and you flashed your drive.with the mixed up ones.

 

[razadon]

You just need your key that's all too your consle and you'll be fine aslong you gt key

 

[urban999]

this one works for me 01 04 01 00 02 01 53 54 04 01 05 01 FF FF FF FF mod 8
but it still says open tray but very longer after the others did and i am coming to the conclusion its the pcb or the laser as gone pfft :-(

 

[x360ccm]

have you got ur first dump of your drive aka dummy.bin file .

was your drive lable 9504 but showed up in jf as a 0225.

 

[urban999]

yes i have it but it gives me the same problem

P.S it as this cal data tho 01 04 01 00 02 01 00 18 02 01 53 54 04 01 05 01

but this one sims to work better 01 04 01 00 02 01 53 54 04 01 05 01 FF FF FF FF

 

[x360ccm]

yes i have it but it gives me the same problem

have you messed with it.

and you still aint said if


your drive labled 9504 but showed up in jf as a 0225.:biggrin:

 

[urban999]

sorry mate i dont save the logs never had problems before i would not class meself as a noob but guest i am now lmfao

 

[x360ccm]

can you post your jf log

 

[urban999]

ok so i tryed the new v1.92 and i still have the same problem going to try nex tx pcb now and see what happens