Get back to X3 bios from EvoX?

[dcarpenter85]

Hello everyone, first off i'd like to thank team X for the excellent chip they are supplying us with and for all their hard work and dedication. I just installed my chip this evening and it took me about 3 hours since i have never touched a solder iron before tonight. Thanks to their tutorials i was able to accomplish everything correctly on my first attempt.

My question for everyone is this, i flashed my bios to the most recent x3 bios and then i installed evox. When i installed evox i told x3 config not to start when i power on (it just loads straight into evox). How do i get back to the x3 bios instead of loading evox now? I am a bit confused and I couldnt find a guide answering this question. Thanks!

 

[HoBoZ]

hold the white button down on startup

 

[dcarpenter85]

thanks hoboz

 

[warbeast22]

External DL DVD Burner Recommendation

Hey Guys,

I am new to the site. I am looking to pick up a external DL DVD Burner to burn some Xbox 360 games with. I have a friend that will explain how to burn them and what not, but doesnt know which one I should get because his is built-in.

Any recommendations on a good quality DL that will serve my purpose without costing me a ton.. Thats all I want/need it for.

 

[Tomneed]

Re: External DL DVD Burner Recommendation

I have the LITE-ON DVDRW SOHW-1673S USB Device (DVD+R9:4x, DVD+RW:16x/8x, DVD-RW:16x/6x, DVD-ROM:16x, CD:48x/24x/48x DVD+RW/DVD-RW).....can get them at Walmart for like 80-100 bucks, i mainly got ot to copy DVD's from 1 drive to another.....but works well for the DL burning....just remember to burn no higher than 2x...

 

[warbeast22]

Re: External DL DVD Burner Recommendation

Why do u say no more than 2x??

 

[Tomneed]

Re: External DL DVD Burner Recommendation

If you burn faster than 2x you will have a very good chance of getting freeze ups and miss prints on your data transfer. Also make sure that you use a high quality DL DVD, the best out is Verbatim. I use the memorex, there cheaper in cost and have had no issues thus far.