get cpukey whit network cable

[x23are]

how do i get my cpukey whit network cable?
when i put the xell ip in xebuild i didnt get my cpukey.

 

[mrfixit]

try putting it into internet explorer

Using your web browser, connect to the IP address shown next to network config: For example: http://192.168.1.47

 

[mrfixit]

did this work m8

 

[x23are]

try putting it into internet explorer

Using your web browser, connect to the IP address shown next to network config: For example: [URL="http://192.168.1.47"]http://192.168.1.47[/URL]

i did this job but not recognized xell

 

[mrfixit]

so you cant boot to xell

 

[big_ted]

are you linking direct between console and pc or going through a hub, if it's the first you'll need a cross over cable.

Ted

 

[x23are]

are you linking direct between console and pc or going through a hub, if it's the first you'll need a cross over cable.

Ted

yes.i linked direct.
is 360 network cable or modem cable cross
? it tested them but no result.

 

[BL4K3Y]

Can you confirm that XeLL boots successfully?

You cannot access the HTTP interface until XeLL has loaded.

 

[x23are]

Can you confirm that XeLL boots successfully?

You cannot access the HTTP interface until XeLL has loaded.

yes. my console rghed successfully.i turn it on whit eject button to see xell.

 

[BL4K3Y]

Try connecting your console to a router with DHCP enabled, it will make things easier and your console will automatically get it's own IP address.

 

[Vest1ge]

This may sound weird, but I have found issues with the latest version of multi-builders ecc XELL having problems with networking. But the backup version that is loaded with the eject button works.

Also if you are using a laptop, disconnect from all wireless networks. And assign your computer an IP address from the network config something other than 192.168.1.99 as this is what the Xbox will use when it cannot find a DCHP server. Then just go to http://192.168.1.99 in your web browser

 

[faz2k2000]

be sure you are using a crossover cable for direct connection...

 

[ARUNCREATIONS]

Hai
use crossover cable
Then ..configure tcp/ip setting in ur pc manually to 192.168.1.100 and 255.255.255.0 and hit enter.
Now boot into xell after key displayed in tv monitor u can see the ip number as 192.168.1.99
Enter it in ur browser and hit enter..Thats all

 

[Martin C]

Never had an issue and I use ICS through my laptop to serve IP addresses via its built-in DHCP server.

 

[BL4K3Y]

Never had an issue and I use ICS through my laptop to serve IP addresses via its built-in DHCP server.

This works well if you don't have a router.

 

[Martin C]

I use ICS as where I do my Xbox stuff isn't near a network point. I can get an entire RGH/JTAG done without moving the board at all.