- Jan 31, 2011
- 98
- 8
Required apps:-
Easy GGbuild:- http://www.tortuga-cove.com/x360/1066-easy-ggbuild-v03-by-rogero
Nandpro 2.0e:- Download from Xbins
Reset glitch Hack 1.1:- Download from Xbins
360 Flash dump tool 0.97:- http://dwl.xbox-scene.com/xbox360pc/nandtools/360_Flash_Tool_v0.97.rar
1) Update your console to the latest dash 2.0.13604.0
2) Dump the nand 64mb(for 256mb/512mb) jasper system & 16mb for Jasper, Falcon, Zephyr & trinity(Slim) atleast five times to be very sure, compare all the dumps with each other and choose the one which matches with no difference. eg: "nandpro usb: -r16 nand.bin" or "nandpro usb: -r64 nand.bin"
If you get any bad blocks than please remap it.
3) (This Step is for Jasper only)Open 360 flash dump 0.97 tool, browse to your nand and check your 2BL[CB] no. eg: 6750, Note: If you have 6751 or 6752 than your jasper is currently not exploitable via reset glitch hack as it has 2nd stage CB which needs more work to be able to glitch. So don't move forward if you have 6751 or 6752.
Uploaded with ImageShack.us
4) Create the ecc via cmd(procedure given in RGH Tutorial) and Copy the .ecc file to your nandpro folder, flash the ecc file to your nand via command: "nandpro usb: +w16 image_00000000.ecc" or "nandpro usb: +w64 image_00000000.ecc"
5) Now do the RGH wiring with your xilinx xc2c64a chip of your choice, Now a lot of different makes of these chips are available in the market.(Wiring Instructions is given in the RGH 1.1 tutorial pdf). You should have good soldering skills to achieve RGH.
6) Turn on the console and the console should boot xell giving you your cpu key and dvd key. Copy your CPU key in a notepad and keep it safe.
7) Now download Easy ggBuild 0.33b by Rogero & extract it to your desktop.
8) Goto ggbuild\Data\my360 & paste your original nand here and change the name of your nand to nanddump.bin & make a txt file in the same place named "cpukey.txt" & inside the text file write your cpu key and save it.
Uploaded with ImageShack.us
9) Now go back to the ggbuild root folder and run "run.exe" file and follow the instructions and your ggbuild image will get created inside ggbuild\data folder named
"updflash.bin"
10) Now copy the updflash.bin file and paste it to your nandpro folder and flash the new ggbuild image i.e. "updflash.bin" to your nand. eg: "nandpro usb: -w16 updflash.bin" or "nandpro usb: -w64 updflash.bin"
Please note:- Do not use +w here, if used your console will not start, beware
11) If all the above steps are performed perfectly your console should now boot into the new hacked dash where you can run all your homebrews.
Please Note:- I should not be held responsible for any harm done to your console, this procedure is performed by me on all fat hdmi consoles and it always worked perfectly for me.
Credits to GliGli and all who worked hard to bring out this fantastic hack. Thank you.
Easy GGbuild:- http://www.tortuga-cove.com/x360/1066-easy-ggbuild-v03-by-rogero
Nandpro 2.0e:- Download from Xbins
Reset glitch Hack 1.1:- Download from Xbins
360 Flash dump tool 0.97:- http://dwl.xbox-scene.com/xbox360pc/nandtools/360_Flash_Tool_v0.97.rar
1) Update your console to the latest dash 2.0.13604.0
2) Dump the nand 64mb(for 256mb/512mb) jasper system & 16mb for Jasper, Falcon, Zephyr & trinity(Slim) atleast five times to be very sure, compare all the dumps with each other and choose the one which matches with no difference. eg: "nandpro usb: -r16 nand.bin" or "nandpro usb: -r64 nand.bin"
If you get any bad blocks than please remap it.
3) (This Step is for Jasper only)Open 360 flash dump 0.97 tool, browse to your nand and check your 2BL[CB] no. eg: 6750, Note: If you have 6751 or 6752 than your jasper is currently not exploitable via reset glitch hack as it has 2nd stage CB which needs more work to be able to glitch. So don't move forward if you have 6751 or 6752.
Uploaded with ImageShack.us
4) Create the ecc via cmd(procedure given in RGH Tutorial) and Copy the .ecc file to your nandpro folder, flash the ecc file to your nand via command: "nandpro usb: +w16 image_00000000.ecc" or "nandpro usb: +w64 image_00000000.ecc"
5) Now do the RGH wiring with your xilinx xc2c64a chip of your choice, Now a lot of different makes of these chips are available in the market.(Wiring Instructions is given in the RGH 1.1 tutorial pdf). You should have good soldering skills to achieve RGH.
6) Turn on the console and the console should boot xell giving you your cpu key and dvd key. Copy your CPU key in a notepad and keep it safe.
7) Now download Easy ggBuild 0.33b by Rogero & extract it to your desktop.
8) Goto ggbuild\Data\my360 & paste your original nand here and change the name of your nand to nanddump.bin & make a txt file in the same place named "cpukey.txt" & inside the text file write your cpu key and save it.
Uploaded with ImageShack.us
9) Now go back to the ggbuild root folder and run "run.exe" file and follow the instructions and your ggbuild image will get created inside ggbuild\data folder named
"updflash.bin"
10) Now copy the updflash.bin file and paste it to your nandpro folder and flash the new ggbuild image i.e. "updflash.bin" to your nand. eg: "nandpro usb: -w16 updflash.bin" or "nandpro usb: -w64 updflash.bin"
Please note:- Do not use +w here, if used your console will not start, beware
11) If all the above steps are performed perfectly your console should now boot into the new hacked dash where you can run all your homebrews.
Please Note:- I should not be held responsible for any harm done to your console, this procedure is performed by me on all fat hdmi consoles and it always worked perfectly for me.
Credits to GliGli and all who worked hard to bring out this fantastic hack. Thank you.
Last edited:
