Glitch light on ROL Rjtag?

[ObeyNation]

Hey i was wondering if anyone has been able to make the xbox ROL on a phat get a light to flash or all lights to flash while its glitch like on the rjtag board the green light flashes to indicate it trying to glitch. but instead of there show on the ROL. i saw someone doing it on a coolrunner if i remember correctly. But i couldnt find a guide to do it for rjtag. can anyone tell me how or if there is a guide on a differnt fourm or something i looked but didnt find anything. if its not possible its fine too just thought it would be nice to have . thanks!

 

[Martin C]

This might help:

http://team-xecuter.com/forums/showthread.php?t=84252

 

[gavin_darkglide]

That is a good guide, but it doesnt mention the ROL point on the R-Jtag chip, so you dont need to solder to the led on the r-jtag chip.

 

[ObeyNation]

This might help:

http://team-xecuter.com/forums/showthread.php?t=84252

Thats the guide i saw and was wondering if i could do it on rjtag . So basically if i solder positive side of the rjtag light to a positive side of a led it should work? or is there a somewere else i could solder it to ? like on the coolrunner one tell you that you can solder to r1 instead. what point found it be for rjtag? and which side is positive and which side is negative on the rjtag board thanks in advanced

 

[gavin_darkglide]

Just use the ROL pad on the R-Jtag..... it is what it is there for, so you dont have to solder to the led on the r-jtag board. while that guide works, it is easier to solder to the pad, then the LED.

 

[ObeyNation]

Just use the ROL pad on the R-Jtag..... it is what it is there for, so you dont have to solder to the led on the r-jtag board. while that guide works, it is easier to solder to the pad, then the LED.

Alright i will try it out thanks

 

[ObeyNation]

Just use the ROL pad on the R-Jtag..... it is what it is there for, so you dont have to solder to the led on the r-jtag board. while that guide works, it is easier to solder to the pad, then the LED.

Should i use a resistor ? i have some 10k 1/4 resistors

 

[gavin_darkglide]

no, that shouldnt be needed, but i think a diode is(Dont quote me).