LITEON DG-16D4S - SLIM Got 0401 in vender mode but does not read!

L

lil BLu3 SMuRF

VIP Member
Jul 20, 2010
399
0
Louisiana, USA
BraveH43 said:
The fact that VIA doesn't work well with slim drives is well known - I presume your flash to 1.91 was its first use ?
You went from having a blank chip (works on almost any chipset)
Then you flashed it with locked slim drive (0272) fw -(after outro this is now essentially a slim drive - enter the VIA problems)

There is a work round for this but its a pita

IF you have a PMT set up (probe 3 style)
then
1. Click Intro
2. Power off on CK3
3. Click Yes
4. Hold in your Probe 3 Button (the one on your 3.3v Line on cable)
5. Power ON on CK3
6. a second after powering on - release the probe 3 Button.

This delays powering the SPi and allows drive to enter Vendor Mode!

failing this you could also use Badflash Method for Slims
during intro ........
1. Power off CK3
2. Probe MPX01 (with PMT)
3. Power ON CK3
4. As soon as you see status change lift the probe (DONT HOLD IT THERE)
Click to expand...
I tried both methods and only the 2nd method worked. Now I got into vendor 0x72 but I could not read the FW. I clicked read and it said my SPI was locked.

So then I pressed slimkey and when it came up to intro I did the same thing. Here is my log for the slim key and BTW I may have gotten my key but each time I do it it is different but I compared all 4 and typed my own key based on the percentage of each byte on the 4
Code: 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.87 Beta (277)
Session Started Sun Sep 11 22:39:45 2011
 
This is a 32 bit process running on a 32 bit CPU 
portio32.sys Driver Installed 
portio32.sys Driver Started, thanks Schtrom ! 
Found 4 I/O Ports.
Found 2 Com Ports.
Found 3 windows drives A: C: Z:
Found 0 CD/DVD drives
 
 
Drive is Slim Lite-On.. 
 
 
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        
0020: 30 34 30 31 00 00 00 00 - 00 00 00 00 00 00 00 00 0401............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 36 43 47 31 31 - 32 38 30 33 30 30 44 57 D716CG11280300DW
0070: 4C 20 20 20                                       L               
 
Sending Vendor Intro to port 0xFE20
Status 0x51
Re-sending Vendor Intro: 
.............
Serial flash found with Status 0x72
 
Sending Device ID request to port 0xFE20
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name:  Winbond/NEX(W25P20/NX25P20)
Flash Size:  262144 bytes
............
Stage 1 failed
 
Key: ****(blank'd out for obvious reasons)**** verification failed !
 
SlimKey extraction failed!
 
 
No Drive Detected! DVDkey files extraction aborted! 
 
Drive is Slim Lite-On.. 
Drive is Slim Lite-On.. 
 
 
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        
0020: 30 34 30 31 00 00 00 00 - 00 00 00 00 00 00 00 00 0401............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 36 43 47 31 31 - 32 38 30 33 30 30 44 57 D716CG11280300DW
0070: 4C 20 20 20                                       L               
 
Sending Vendor Intro to port 0xFE20
Status 0x51
Re-sending Vendor Intro: 
..................
Serial flash found with Status 0x72
 
Sending Device ID request to port 0xFE20
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name:  Winbond/NEX(W25P20/NX25P20)
Flash Size:  262144 bytes
............
Stage 1 failed
 
Key: ****(blank'd out for obvious reasons)**** verification failed !
 
SlimKey extraction failed!
 
Drive is Slim Lite-On.. 
 
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        
0020: 30 34 30 31 00 00 00 00 - 00 00 00 00 00 00 00 00 0401............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 36 43 47 31 31 - 32 38 30 33 30 30 44 57 D716CG11280300DW
0070: 4C 20 20 20                                       L               
 
Sending Vendor Intro to port 0xFE20
Status 0x51
Re-sending Vendor Intro: 
...........
Serial flash found with Status 0x72
 
Sending Device ID request to port 0xFE20
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name:  Winbond/NEX(W25P20/NX25P20)
Flash Size:  262144 bytes
............
Stage 1 failed
 
Key: ****(blank'd out for obvious reasons)**** verification failed !
 
SlimKey extraction failed!
 
Drive is Slim Lite-On.. 
Drive is Slim Lite-On.. 
 
 
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        
0020: 30 34 30 31 00 00 00 00 - 00 00 00 00 00 00 00 00 0401............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 36 43 47 31 31 - 32 38 30 33 30 30 44 57 D716CG11280300DW
0070: 4C 20 20 20                                       L               
 
Sending Vendor Intro to port 0xFE20
Status 0x51
Re-sending Vendor Intro: 
............
Serial flash found with Status 0x72
 
Sending Device ID request to port 0xFE20
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name:  Winbond/NEX(W25P20/NX25P20)
Flash Size:  262144 bytes
............
Stage 1 failed
 
Key: ****(blank'd out for obvious reasons)**** verification failed !
 
SlimKey extraction failed!
 
M

MightyModz

VIP Member
Dec 15, 2004
158
0
Stoke-on-Trent
Slim drives don't like via chipsets at all, get yourself an x360 USB pro otherwise your bound to run into more problems, on a side note I had success using onboard nvidia chipset before I got my USB pro, still I had to cut a trace and probe mpx01 to get it into vendor mode.
 
C

changbom

Senior Member
Mar 31, 2011
120
0
orgin PCB can't read the FW. You must unlock to read the FW. Only read slim key if you don't unlock the driver
 
J

jpoy808

VIP Member
May 2, 2010
313
0
usa
got the same problem but got to read the key also using sata port, got it to unlock but froze when I click write. one dot then hangs, tried twice, thats why I'am ordering a usb pro, had to restart pc everytime in order to get in vendor mode
 
You must log in or register to reply here.