GENERAL Got another box

R

rawman34

Full Member
Jun 12, 2011
59
0
TOOM-STONE POWER
right xecuter team i have managed to get another 360 :eek:

i bet its sh*ting it slef as i have a soldering iron:D

need advise before i kill it oh sorry try to read nand my misstake:eek:
 
RROD!

RROD!

VIP Member
Apr 13, 2011
786
0
what is the gauge of the solder you are using i like to use anything from .4 upto .7 DIA and also do you have flux are you useing headers or QSB if using headers has the points on the new mobo been filled with solder if so needs to be desoldered ..and for now just do the nand x side of the soldering and dump your keys before you move on to soldering the jtag ..
 
R

rawman34

Full Member
Jun 12, 2011
59
0
TOOM-STONE POWER
do not know what dir solder is but it fits into holes on mobo but the nand side holes are ful of solder got some qsb boards so i will use those and on ferther inspection jtag side is full as well
 
manwithoutname

manwithoutname

1
Jun 4, 2010
3,080
0
If you ruined the first board, you can send it to me and I'll work my magic on it :cool:.
 
RROD!

RROD!

VIP Member
Apr 13, 2011
786
0
flashing360 said:
or me lol.

solder diameter is irrelevant, i use whatever i pick up at the time. just take your time and be sure to use flux.
Click to expand...
all i was thinking a smaller dia solder would have a lot lower melting point and make it easyer for him to control the flow without the need to use alot of flux or melt the QSB..for ppl like you or anyone that has done fair bit of soldering yer any size ..there was alittle method in my madness not sure where but i try lol ;):D not forgetting this is the second 360
 
RROD!

RROD!

VIP Member
Apr 13, 2011
786
0
if you removed or bridged the e fuse that can happen ?? if not have you tryed to flash back to the backup of your nand ? also what mobo are you jtag
 
RROD!

RROD!

VIP Member
Apr 13, 2011
786
0
also what have you used headers QSB what app are you using to write nand also it maybe good idea to now you can dump good nand keys to jtag as i have seen post where guy had e79 and when he had done the jtag was fine if you want i can pm you the link
 
R

rawman34

Full Member
Jun 12, 2011
59
0
TOOM-STONE POWER
E79 error

dumped nand wrote xell got fuse set keys 3-5 4-6 match

created fb in freeboot wrote to nand and E79

can anyone help

do i write orignal dump to nand ?????????????
 
manwithoutname

manwithoutname

1
Jun 4, 2010
3,080
0
Which tool did you use to create freeboot and what options did you select when compiling freeboot?
 
R

rawman34

Full Member
Jun 12, 2011
59
0
TOOM-STONE POWER
arrrrrrrrr i used coolshrimp and did no setup

at least av hopefully got soldering down now but as for first board gunner have to send away a think alhave one more go with it then its geting sent to someone

as for this one i have still got nand wired took jtag off
 
Last edited:
You must log in or register to reply here.