RGH green led flash but no boot

[leonheart]

Hello.

I buy x360 jasper 512 after failed rgh. Someone mess nicely with it. First i repair hana point, pll_cpu_bypass point witch a wire. Dump nand, create stock nand in multibuilder 0,7 ( have cpu key ) and x360 boot to stock nand, great.

So i buy a tx coolruner, program it in impact, wire. Create ecc in multibuilder 0,7 ( try also jtag tool, xnandhealer ) and flash it witch the commande
+w64 name.ecc

Now console try to boot, i have solid red, i have green flashing about 5s, but it wont boot. I try to flash glitch image from multibuilder, and still nothing.

Corrent me if i am wrong, but if green flash then my wireing is good exept reset wire ? I try to use a 68 cap, use long and short wire to reset, still nothing.

If you have any sugestions what may go wrong, please share.

 

[Martin C]

There's a sticky called 'pics' right here in this area. Did you read it?

 

[leonheart]

Sorry, too rush.

I dont have a good camera, i try to borrow one. I can post logs right now :

create ecc i mb 0,7

* found flash image, unpacking...
ECC'ed - will unecc.
Found 2BL (build 6750) at 00008000
Found 4BL (build 8453) at 00011a40
Found 5BL (build 1888) at 000171c0
* found decrypted CD
* found XeLL binary, must be linked to 1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6750
CB_B: missing
CD (image): 8453
CD (decrypted): 8453
* checking for proper 1BL key... ok
* decrypting...
* checking if all files decrypted properly... ok
* checking required versions... ok
* this image will be valid *only* for: jasper/CB_6750
* patching SMC...
CRC32: 5b3aed00
patchset "Jasper, version 2.3" matches, 1 patch(es)
* zero-pairing...
* constructing new image...
* base size: 70000
* No separate recovery Xell available!
* Flash Layout:
0x00000000..0x000001ff (0x00000200 bytes) Header
0x00000200..0x00000fff (0x00000e00 bytes) Padding
0x00001000..0x00003fff (0x00003000 bytes) SMC
0x00004000..0x00007fff (0x00004000 bytes) Keyvault
0x00008000..0x00011a3f (0x00009a40 bytes) CB_A 6750
0x00011a40..0x00017a3f (0x00006000 bytes) CD 8453
0x00017a40..0x000bffff (0x000a85c0 bytes) Padding
0x000c0000..0x000fffff (0x00040000 bytes) Xell (backup)
0x00100000..0x0013ffff (0x00040000 bytes) Xell (main)
* Encoding ECC, please wait ...
------------- Written to ...\Data\image_00000000.ecc

 

[Martin C]

No point until you have pics of your wiring.