i have an xbox with a 2.6 in it and i am looking for a quide to install the new x3 any help thanks
guide for 2.6 upgrade to 3
- Thread starter kossdust
- Start date
Martin C
VIP Member
1. Remove 2.6 external switch and cable.
2. unplug d0/hdd/lan cable from 2.6.
3. Plug X3 chip into pinheader.
4. Plug d0/hdd/lan cable into x3.
5. Fit power/eject board and wire accordingly
6. Fit external switch and wire accordingly.
In other words, there's nothing else for you to solder!
Martin
2. unplug d0/hdd/lan cable from 2.6.
3. Plug X3 chip into pinheader.
4. Plug d0/hdd/lan cable into x3.
5. Fit power/eject board and wire accordingly
6. Fit external switch and wire accordingly.
In other words, there's nothing else for you to solder!
Martin
New xbox360 - 93450C
Alright I've been reading up on modding my xbox for a few days. I have a few questions, some of them I've seen in other threads but aren't always clear anyways here goes!
So I have a 360, the newest type 93450C, here is a screenshot
I've bought: (was recommended to get these)
360Xtractor Pro v2.3 http://www.modchipcentral.com/store/360xtractor-pro-v1.2-pptc-fuse.html
Maximus Vampire (Xtractor pro addon) http://www.modchipcentral.com/store/maximus-vampire-xtractor-pro-addon.html
Now I have to go buy everything else, could anyone provide me with the exact tools I need, as well as the most up to date tutortial? Thanks again.
Alright I've been reading up on modding my xbox for a few days. I have a few questions, some of them I've seen in other threads but aren't always clear anyways here goes!
So I have a 360, the newest type 93450C, here is a screenshot
I've bought: (was recommended to get these)
360Xtractor Pro v2.3 http://www.modchipcentral.com/store/360xtractor-pro-v1.2-pptc-fuse.html
Maximus Vampire (Xtractor pro addon) http://www.modchipcentral.com/store/maximus-vampire-xtractor-pro-addon.html
Now I have to go buy everything else, could anyone provide me with the exact tools I need, as well as the most up to date tutortial? Thanks again.
Re: New xbox360 - 93450C
you're gonna have to solder and stuff seen as you have the newest drive. see the jungleflasher tutorial provided above.
I managed to pick up an elite console, Jasper chipset too and I was able to flash it coz it had the 74850c firmware, so I was lucky!
you're gonna have to solder and stuff seen as you have the newest drive. see the jungleflasher tutorial provided above.
I managed to pick up an elite console, Jasper chipset too and I was able to flash it coz it had the 74850c firmware, so I was lucky!
Re: New xbox360 - 93450C
should i be doing this though for the vampire?
http://www.360xtractorpro.com/360xtractorpro/downloads/VAMPIRE_STANDALONE_INSTALL_GUIDE.pdf
any specific wire I need for this?MrPete1985 said:
should i be doing this though for the vampire?
http://www.360xtractorpro.com/360xtractorpro/downloads/VAMPIRE_STANDALONE_INSTALL_GUIDE.pdf
Re: New xbox360 - 93450C
I used the MRA hack when I did mine I just used some 30 or 32 awg I forget exactly, I used the same wire people use for mod chip installs I think it is called krynal wire can not remember the exact name.
I used the MRA hack when I did mine I just used some 30 or 32 awg I forget exactly, I used the same wire people use for mod chip installs I think it is called krynal wire can not remember the exact name.
Re: New xbox360 - 93450C
do you guys bother using those pens? or just use a exacto knife or screwdriver
do you guys bother using those pens? or just use a exacto knife or screwdriver
Re: New xbox360 - 93450C
I used a screw driver to scrape off most of it then a fiber glass pen to clean them up real nice. just the screw driver itself would be fine.
I used a screw driver to scrape off most of it then a fiber glass pen to clean them up real nice. just the screw driver itself would be fine.