RGH Hacked Dash Will not Boot

K

Kelticwarrior

Full Member
Dec 25, 2010
75
0
Hi i have a Xecuter coolrunner on my 16MB Jasper. It will boot into Xell when i press eject but will not boot into hacked dash. I built the nandflash.bin file with ggBuild_0.33b, 360_Multi_Builder_v0.4, 360_Multi_Builder_v0.3, BestPig and with them all its the same can boot into Xell but not hacked dash. I done the RGH on my slim and it Glitched straight away into Xell and hacked dash so i dont know why this Jasper will not boot into the hacked dash. Any help would be greatly apprieciated. Thanks!
 
n1ght0wl

n1ght0wl

BANNED
Nov 30, 2011
799
0
London
have you tried coolshrimps jtag tool ? and ive found you dont need the caps on 16mb jasper, well i havent on either of mine.
 
K

Kelticwarrior

Full Member
Dec 25, 2010
75
0
blakey8 said:
Are you using a donor NAND or the one you dumped from your console?
Click to expand...
Im using my own Nand. Dumped 3 times no difference in files. Checked CPU Key with 360 Flash Tool and it shows correct information so the Key is right.

keil423 said:
did you install XEX and Freestyle to your harddrive?
Click to expand...
Dont even have a hard drive connected to console. And didnt get into hacked dash to install anything.

n1ght0wl said:
have you tried coolshrimps jtag tool ? and ive found you dont need the caps on 16mb jasper, well i havent on either of mine.
Click to expand...
No i didnt try coolshrimps Jtag Tool. I will look for it now.
 
n1ght0wl

n1ght0wl

BANNED
Nov 30, 2011
799
0
London
maybe you should try with the 68nF cap and see what results you get
 
K

Kelticwarrior

Full Member
Dec 25, 2010
75
0
splatem said:
Have you tried writing xell, and then using rawflash on a USB key to write the final hacked dash image?
Click to expand...
I wrote the Nand file with Nand-X and also through Xell with file on USB Key. Every way i try and with every program to create the image its the same i can boot Xell but not hacked dash.
 
D

d4rk_4ng3l

Junior Member
Feb 2, 2011
23
0
I think, he meant cool runner. Does Cool Runner flash in every 5 secs or so?
 
Last edited:
J

Justice1231

VIP Member
May 4, 2011
1,005
0
Adelaide, Australia (down south)
might be worth redoing your glitch image, i had a simlar problem (but migh coolrunner led was flashing), so i re-did the image making sure you select the correct board for you image.
I was following a tutorial i think i had monkey see monkey do syndrom and i possibly selected the wrong board type, when i remade the image with the correct board type it booted straight away.
 
K

Kelticwarrior

Full Member
Dec 25, 2010
75
0
I redone the Glitch Image so many times with all different programs still the same. I select the right console. Jasper 16MB. I tried with dashlaunch patches and without. i even done it the manual way with ggbuild_v0.33b. I set CF LDV to 5 which is what it says in 360 flash tool. I even tried different values as a last resort. I dont know why this console will not boot hacked dash!:confused:
 
You must log in or register to reply here.