Hardware help

[citizen1974]

Hi,

My flashing guy has gone to ground so it looks like I need to do it myself, so apologies for the noobness but we all have to start somewhere!!

I have had a good hunt on here and Google and have found all the software related parts that i need but am unclear on the hardware required to flash my benq.

The guide in particular was last updated in Feb 2011 and recommends CK3i & USB Pro.

Is there newer hardware I should be using?

Do I still need to connect with a SATA or is there a usb method now????

Many many thanks in advance

 

[LoneWolf913]

Best bang for your buck is an X360USB Pro v2, all in one solution that combines the Pro v1 and CK3i together into one device attached via USB.

 

[meads1970]

i good read of the jungleflasher Tutorial and remember to always revort back to stock firmware before doing any xbox updates before you flash to latest LT+ and u will be fine but ready sticky threads,post and tutorials is a must:wink:

 

[citizen1974]

Many thanks, X360USB Pro v2 it is then :smile: will get ordering and reading tutorials.

 

[adamds123]

X360USB Pro v2 and a CK3mini will work just fine you could need a Unlocked PCB too.

 

[Antalpromille]

X360USB Pro v2 and a CK3mini will work just fine you could need a Unlocked PCB too.

If you have the x360pro v2 you dont need the ck3.

 

[frayed]

X360USB Pro v2 and a CK3mini will work just fine you could need a Unlocked PCB too.

you really have no idea what you are talking about??

an unlock pcb for a benq? no

a ck3mini with an x360usb v2? no

if you have no clue, do not post advice

 

[CarpeDiem]

X360USB Pro v2 and a CK3mini will work just fine you could need a Unlocked PCB too.

Honest to god, bro.. if you don't even know what model and type of DVD drive YOU have, why are you attempting to post advice? :crazy: