RGH Hardware needed for Coronas (advice needed)

[fokeiro]

i successfully done RGH on phat and Trinity slims using only my JR-Programmer and a CK3 Rev c , i know for coronas i need the read/write kit with the sd card and a coolrunner too but what else do i need or i can use the same wiring install as for trinity, any help would be greatly appreciated it. i just dont want to waste lot of money and QSBs are not my best friend so i rather do wiring installs.

also the white shielded cable that comes with the runner goes from ground on chassis to ground on CR rev c or goes with blue cable from cpu-rst on board to ground on chassis? just wondering its kind of confusing

 

[Antalpromille]

If Its a 4gb corona you need the 4gb R/W kit, if it's a 16mb corona (these are delivered with hdd) you can use the same nand reader you used on the phat console. Besides that you need a glitcher with built in oscillator, like the slim proto v1 or v2. You may also need a post fix adapter.

 

[fokeiro]

If Its a 4gb corona you need the 4gb R/W kit, if it's a 16mb corona (these are delivered with hdd) you can use the same nand reader you used on the phat console. Besides that you need a glitcher with built in oscillator, like the slim proto v1 or v2. You may also need a post fix adapter.

thats not bad so i cant use the CR revc then and is there another alternative to proto seems to be out of stock everywhere and if im correct the postfix is for coronas V3 to V6 right ? and is there a way to use CR rev C and add an oscillator somehow ?

 

[Antalpromille]

thats not bad so i cant use the CR revc then, and what are the requirements that i need to have to use or not the post fix ?

Yes but only if you add an oscillator or the QSB upgrade. The thing that determines if you need the postfix adapter or not is if you have the post traces on your board or not, if you don't then the original post point is grounded and the adapter is needed to obtain the post signal.

 

[fokeiro]

Yes but only if you add an oscillator or the QSB upgrade. The thing that determines if you need the postfix adapter or not is if you have the post traces on your board or not, if you don't then the original post point is grounded and the adapter is needed to obtain the post signal.

yeah notice path are missing so i would need that but looks pretty simple to solder actually, so the CR Revc how can i add an Os or i guess i can get the qsb board and wire it instead of soldering it, i dont know if this would offer same result, im not really into quick booting time, as long as it boots , im fine with it.

and for the cpu rst point under the xclamp, is there another alternate point for it, of i have to take out the xclamp, u regularly use screws with washers to put it back ot use the same xclamp?

 

[GeekHeat]

U can use a cr3 lite, cr3 pro, slim proto or wait for the cr4. All have the oscillator crystal built into the chip.

 

[fokeiro]

U can use a cr3 lite, cr3 pro, slim proto or wait for the cr4. All have the oscillator crystal built into the chip.

they all hard to find specially on authorize retailers that chip to us, guess to my luck they all out of stock and i dotn want to risk buying fakes

 

[jligg]

Where you located? I have a cr3 pro fakepost for sale

 

[fokeiro]

Where you located? I have a cr3 pro fakepost for sale

im on south florida, more specifically miami and how much you selling it for and can i use this for those new Xbox Slim E manufacture date 2014 ?

If Its a 4gb corona you need the 4gb R/W kit, if it's a 16mb corona (these are delivered with hdd) you can use the same nand reader you used on the phat console. Besides that you need a glitcher with built in oscillator, like the slim proto v1 or v2. You may also need a post fix adapte

To make it work with the coolrunner this is all i would need or im missing anything ???

http://www.modchipcentral.com/store/product.php?productid=17840
http://www.modchipcentral.com/store/xecuter-coolrunner-rev-c-nand-x-add-on-usa-canada.html
http://www.modchipcentral.com/store/product.php?productid=17935
http://www.modsupplier.com/catalog/xecuter-corona-v2-4gb-nand-rw-kit-p-1055.html