RGH Has anyone managed to RGH2 a zephyr?

[FatalityxF]

Im aware of the fact that RGH2 wasn't ready for the masses. My question was, has anyone been able to successfully glitcha Zephyr using RGH2.
This is where i'm hoping Martin C or Xecuter, etc could say whether or not a Zephyr has been glitched via RGH2.
Thats all i want to know. NOT HOW DUZ I GLITCH MUH ZEPPHOR WIT RGH2!?!?

The lack or attention to these post seem to me like it hasnt been acheived yet. Again, please correct me if i am wrong.



Can you show me some posts that say it is possible? ie someone stating that they have glitched a zephyr with RGH2 with valid proof? as i can't seem to find any success stories.

A breif "We are looking in to it" would suffice...."

Xecuter would not say that Zephyrs were glitchable via RGH2.0 if they weren't. If there's one theme with Xecuter, they test and test and test and get consistent results before anything is put out. Now, with this out early, that may not be 100%. Uber could probably answer the level of depth they went into glitching the Zephyr on 2.0, and discuss how successful it was.

I do know for fact users have been able to get the Zephyr to glitch just fine with normal boot times, so it IS possible to answer your question. How easy that result is to reproduce seems to be the question now, because with a lot of users I see they are having the same issue as you. For now, I personally would wait until the kinks get worked out, but that's my advice. Run it stock and wait for a fix.

Thankfully I don't work with phat consoles anymore and have success 100% of the time with my installs on Slims. Obviously that doesn't apply here, but just as slims took time get dialed in will the Zephyr as well.

I know you're eager, we all are, but what Xecuter says is what I take as fact, and I don't chance until I know things are rock solid (this is why I only use Xecuter equipment honestly). The forum can certainly help you out if you post in the help section for a Zephyr console -- maybe other users can dial you in. Doing it this way is just gonna start a flame war, and I doubt that's what you're looking for.

Good luck!

 

[-DoC-]

it looks like tx dont actually own all the phats after all . in fact im starting to think that this whole rgh hack is very hit and miss at best and they know it and the lack of any offial response from tx ever in the forums they must be laffin all the way to the bank

rgh1

no xenon
falcon /zephyr ( very limited success)
jaspers ( hit and miss )

rgh2

no xenon (was promissed)
no zephyr ( wether its just a script error or hardware )
falcons ( hit and miss at best)
jaspers ( hit and miss )
trinity (so so )

these are just my findings

qsb's are utter [email protected]!

tx responces ..............erm pmsl!


and it is a shame as i have used tx products for years but i fear no more after shelling out £50+ for some shoddy plastic and a pcb with a simple glitching programmed chip oh and the seperate cable for nand-x come on that just took the [email protected]

What the hell are you smoking?

I've done about 45 consoles - Jaspers, falcons and Trinity. All RGH1 never had one problem. All glitch within 30 secs. I have 4 on RGH2 - 2 jaspers and 2 falcons. No problems. I have zephyrs that if they don't glitch on the first 6 cycles you have to power cycle and they will usually glitch the 2nd time around.

Tx never made any promises on xenon and if you knew anything zephyrs are very similar to xenons.

Go cry elsewhere or learn how to glitch. Don't blame xecuter for releasing rgh2 early because some ass hat decided to distribute the code.


Sent from my DROID RAZR using Tapatalk 2

 

[mrdrifta]

Xecuter would not say that Zephyrs were glitchable via RGH2.0 if they weren't. If there's one theme with Xecuter, they test and test and test and get consistent results before anything is put out. Now, with this out early, that may not be 100%. Uber could probably answer the level of depth they went into glitching the Zephyr on 2.0, and discuss how successful it was.

I do know for fact users have been able to get the Zephyr to glitch just fine with normal boot times, so it IS possible to answer your question. How easy that result is to reproduce seems to be the question now. For now, I personally would wait until the kinks get worked out, but that's my advice.

Thankfully I don't work with phat consoles anymore and have success 100% of the time with my installs on Slims. Obviously that doesn't apply here, but just as slims took time get dialed in will the Zephyr as well.

I know you're eager, we all are, but what Xecuter says is what I take as fact, and I don't chance until I know things are rock solid (this is why I only use Xecuter equipment honestly). The forum can certainly help you out if you post in the help section for a Zephyr console -- maybe other users can dial you in. Doing it this way is just gonna start a flame war, and I doubt that's what you're looking for.

Good luck!

I know TX is always true to their word, But in that respect, having RGH2 leaked forcing the release, all i want to know is what they had to go through to achieve rgh2 boots on a zypher console. whether it was possible with current hardware or needed the developement boards.

This is something that i think only a select few (Uber, Xecuter, Martin C, etc) could answer.

Im not bagging on the product, It works excellent for what it was designed for (RGH1), i just would like to know if they managed to boot a Zephyr with RGH2 via current hardware or not, thats all.

 

[rick48235]

i had problem with rgh 1 at first but it was my mistake. when done right no problem on jasper and falcon i love falcons.

 

[FatalityxF]

I know TX is always true to their word, But in that respect, having RGH2 leaked forcing the release, all i want to know is what they had to go through to achieve rgh2 boots on a zypher console. whether it was possible with current hardware or needed the developement boards.

This is something that i think only a select few (Uber, Xecuter, Martin C, etc) could answer.

Im not bagging on the product, It works excellent for what it was designed for (RGH1), i just would like to know if they managed to boot a Zephyr with RGH2 via current hardware or not, thats all.

Gotcha. Yep this'll undoubtedly be a situation where development much continue on RGH 2.0. There's been trouble on Jaspers too, and OggyUK posted a bit about it. As it seems, I can currently say with confidence there's guys working out the bugs. Zephyr might come later, I'm pretty sure they want to dial in Jaspers first. All in due time though. Here's some info that might help:

New Xecuter CoolRunner v2 Hardware:

There have been many obstacles to cross with this because CBA glitching does not behave quite the same as CB glitching. The Coolrunner revisions A&B will glitch for RGH2.0 but results will vary and with some, boot times can be worse than trinity and with others they may be instant. These boot times are unacceptable and this is why we have spent the last few weeks designing a new glitch chip that will solve all these problems and will even help with trinity and corona boot times

New Xecuter CoolRunner v2 Upcoming Features:

• Corona support !
• Much better glitch times for RGH1 and RGH2
• All-in-One code for all versions
• Demon integration
• Level shifted POST output
• ....and much more

Development is almost complete - find an image of the CR v2 dev unit in the release pack.

Team Xecuter RGH2.0 For CoolRunner Rev A and B
==============================================

We were not quite ready to release this due to it's unstable boot times on older glitch hardware, but as our code was leaked from a team member AGAIN we had to release this due to another team stealing the code and claiming as their own work. They were even too lazy to change any of the patches to make it look like their own - they are 1:1 same as our original sources. Super lame. It seems some teams think this is the Wii or PlayStation scene and you can act like this. They don't even give credits to cOz for his SMC patcher - because they didn't even know that code was from him of course.

We don't want to get dragged down into bullshit scene politics - most of you won't care anyway, but a lot of guys work very hard on this stuff only to have it stolen with no effort and no credits is just sad. Anyway......

The Xecuter RGH Development Team are pleased to announce the official release of the RGH2.0 hack for all CoolRunner Rev A and Rev B dev boards. All Phat consoles have now been defeated and are totally glitch-able without having a previous NAND dump or CPU KEY (the same applies to Slim Trinity that have been updated to 14717/14719).

Xecuter RGH2.0 Features introduced:

Hack now works on new CB's (14717/14719 update)
Hack now works with all Refurbished Split CB's (4577, 5772, 6752)
Zephyr CB 4578, 4575, 4577
Falcon/Opus CB 5771, 5772, 5773
Jasper CB 6750, 6752, 6753
Trinity (Slim) CB 9188, 9230

To confirm, we can now glitch Phats with any kernel and any bootloader. As soon as you have your CPU KEY, and you are using an Xecuter DemoN you will
ALWAYS be able to switch to a fully hacked NAND and it can never be stopped no matter what update you apply and no matter which efuses are blown !

And in regards to the Jasper (also RGH2.0)

It's in hand. Had to get some Jasper's to a couple of the guys

Try being patient.

A couple of us were trying tweaked cb's last night - people are aware and it is being worked on.

If/When it's sorted, someone will post here. No-one is going to suddenly get it working and not tell you.

If you need your RGH2.0 now I suggest you buy another console that can be done.

I've spent 4 days on this, used every alt point, the console is now not able to be resold in the condition it's in.

Asking every day if its fixed, is not going to fix the issue at hand.

 

[mrdrifta]

Gotcha. Yep this'll undoubtedly be a situation where development much continue on RGH 2.0. There's been trouble on Jaspers too, and OggyUK posted a bit about it. As it seems, I can currently say with confidence there's guys working out the bugs. Zephyr might come later, I'm pretty sure they want to dial in Jaspers first. All in due time though. Here's some info that might help:

And in regards to the Jasper (also RGH2.0)

Thanks for the info mate, but ive been through all of that. What they release info states is that it WILL glitch, all phats on any bootloader.

What i have yet to see (or hear of) is anyone being able to glitch a zephyr using RGH2 (at all)

 

[FatalityxF]

Thanks for the info mate, but ive been through all of that. What they release info states is that it WILL glitch, all phats on any bootloader.

What i have yet to see (or hear of) is anyone being able to glitch a zephyr using RGH2 (at all)

Wouldn't you think that they successfully glitched it themselves before they say they could?

As shown with Xenons Xecuter doesn't tend to operate off of an "in-theory" claim avenue.

I believe the team would've gotten Zephyr's booting RGH, but again it just needs tweaks. Similar to the "in testing" phase C4Eva uses for drive firmware. Xecuter mentioned they needed more time but were rushed, so it's obvious this isn't sure-fire.

When they say "we can't glitch Xenons" in the past I'd expect to hear "we can't glitch Zephyrs -- or have YET to do so successfully". The language they use in the release tells me they've at least got successful glitches for each Zephyr CB, but at this point it's most definitely hit or miss. Developments will hopefully soon come, Xecuter is swamped with the DemoN, Fusion and other products we may not even know about, so an ETA may not be advisable.

OggyUK said a fortnight for the Jaspers, so I'd wager soon after that.

 

[mrdrifta]

I get what you meant mate but so far i have had no clear indication that current hardware allows zephyrs boot RGH2, just want some clarification from someone in the know...

 

[rick48235]

I get what you meant mate but so far i have had no clear indication that current hardware allows zephyrs boot RGH2, just want some clarification from someone in the know...

if you cant get it to work on rgh2 then wait for it tx to finnish. its like a raw steak cooking ( not done). they always improve thier product so just wait.dont wonder everybody. it for the ones that can but if not just wait.

 

[mrdrifta]

if you cant get it to work on rgh2 then wait for it tx to finnish. its like a raw steak cooking ( not done). they always improve thier product so just wait.dont wonder everybody. it for the ones that can but if not just wait.

You people don't get it, I have returned the nand to stock and switch the coolrunner to PRG. I am currently not trying to finish it.
I just want to know if TX is doing anything about this or even if they know its an issue and just aren't doing anything about it for current hardware...

Just anything would be nice, so far anyone with zephyrs have been kept in the dark...

 

[rick48235]

maybe not but wait till its done then bitch.

 

[mrdrifta]

mb itching that i cant make it work, i just want to know if it actually works with current hardware, its a simply question.

I find it odd how no-one seems to be able to give me a straight answer...

 

[rick48235]

i have not also but just wait like everybody is doing. goggle it also

---------- Post added at 00:39 ---------- Previous post was at 00:32 ----------

as hard as it to do zephyr on rgh1 and it was complete so rgh2 is not finnish so what you think

---------- Post added at 00:40 ---------- Previous post was at 00:39 ----------

so wait

 

[mrdrifta]

Rick, stop posting sh*t. I want to hear from uber or secured to give some feedback On rgh2. I have no issue with rgh1. I have done over 2O consoles with no problems. I have a zephyr rgh1 that boots in 1 or 2 glitches and another that glitches in 2-5 glitches.

I have no problem installing RGH on consoles, If I don't get shiny solder points on my installs, I remove everything and start again until I have no doubt that my soldering is perfect.


The problem with zephyr rgh2 is that it stops glitching.

It is a hardware or software Problem. I am 99% sure I is not my soldering.

My conviction is in the fact that the glitch hangs after 4 attempts and then stoPs.

The fact that this has gone unanswered for so long reiterates to me the fact that xecuter hasn't successfully glitches an rgh2 zephyr.

I expect someone to correct me. Failure to do so just gives my theory "more water".....

 

[rick48235]

wit till its done then bitch

 

[ball00]

maybe not but wait till its done then bitch.

I believe he's only asking if it has been done.

Are you saying it hasn't?

It sounds like it hasn't been done to me but zephyrs aren't as common as others and aren't likely as high on the to do list as other projects and issues. Guess we won't know till a mod drops by and answers with a definitive statement.

 

[rick48235]

remember they had problem with jasper rgh2 then they fix it so iam pretty sure they working on your issue too man

does it take someone else to tell you but me

 

[mrdrifta]

I believe he's only asking if it has been done.

Are you saying it hasn't?

It sounds like it hasn't been done to me but zephyrs aren't as common as others and aren't likely as high on the to do list as other projects and issues. Guess we won't know till a mod drops by and answers with a definitive statement.

THANK YOU Ball00, you so far are the only person who seems to know what point im trying to get across....

To add to that, Zyphers have been around for longer than the other hdmi consoles, im not sure what makes them less common.( i dont know how things stand anywhere else, but i have more zephyrs here than any other hdmi console.

remember they had problem with jasper rgh2 then they fix it so iam pretty sure they working on your issue too man

does it take someone else to tell you but me

Uuhhhhmmmm.... Yes, it does. You can only tell me what you assume.... like 90% of the forum members, without actually testing, your assumption holds less water then plastic paper...

What i want is for a mod to stop by and give me a definitive answer, i know for a fact that atleast one has stopped by previously. We are still yet to see any proving material that we do infact "own all the phats".

I stand by TX's products, but thier support seems to be lacking as of late.... (i realise that RGH2 was pushed to release early but a simple" heres RGH2, it's not finished, and zephyrs don't work yet but we are looking into it" would sustain me... (even if you wernt doing anything about it.)

All i want to know is if this is something that TX has encountered and are either looking at for current hardware or fixing for coolrunner V2. I will definitely not be buying a V2 until i not for a fact that it will deal with ALL revisions of xbox360 hardware. Im not going to spend my precious hours filddling with it, trying different resistance, capacitance, and wire lengths to help them 'fine tune' thier product, if this kind of sh*t was guna keep happening.

I expected my original question to have been answered by now. The fact that it hasn't( in any way, shape or form) to me is just appauling. And i know that people are going to bitch about me saying this, because it "was released early" but the fact of the matter is, that it was supposably released in a working fashion( of which it DEFINATELY IS NOT!)


Someone please prove to me that i am being a "noob" and have no idea what i am talking about but i am yet to hear of a Zypher booting RGH2 which to me seems like TX do not infact, own all the phats....

I REALLY F#$KING WISH SOMEONE WOULD PROVE ME WRONG!!!!!!!!!! I JUST WANT THE FACT THE ZEPHYRS DONT WORK TO BE RECOGNIZED...

WHY CANT YOU GIVE ME THAT!?!?!?!

 

[skater411]

yeah i just try i either get few glitch light or blink light really fast no glitch on zephyr for me

 

[ezzda1]

the zephyr I had didn't work,
dash 14719, cb 4575,
as retail, the console boots fine,
with the ecc file and every coolrunner timing file I got 6 green flashes then nothing,
turn off and back on with rol, nothing,
turn off and on at the wall socket another 6 flashes and nothing,
some zephyrs are definitely not working.