Hi,
Modded the box and got the chip re-flashed to bios3.0.3 from my reseller.
booted up and seen the bios, no problem so far.
Linked the box to the PC and attempted to run the Flash from Http.
Got the IP fine from the Xbox and entered it in explorer and selected the upload as explained in the tutorial. With bank switches set as On On Off Off Off as recommended.
The Updating screen never appeared?
Left it for a while but no change.
Obviously i had to reset the Xbox eventually and now i don't get the Bios 3.0.3 on my TV.
I suspect that as the bios never updated that somehow the Bios 3.0.3 has been corrupted and the only Bios available now is what is in the Backup. I suspect that this is bios 3.0.0 . I obviously couldn't update the Backup to bios 3.0.3 as i would need to get the X3 bios into the system before i could do this and flashing with 1959 never worked properly.
Any suggestions or remedies.
Any help would be appreciated. :?
Modded the box and got the chip re-flashed to bios3.0.3 from my reseller.
booted up and seen the bios, no problem so far.
Linked the box to the PC and attempted to run the Flash from Http.
Got the IP fine from the Xbox and entered it in explorer and selected the upload as explained in the tutorial. With bank switches set as On On Off Off Off as recommended.
The Updating screen never appeared?
Left it for a while but no change.
Obviously i had to reset the Xbox eventually and now i don't get the Bios 3.0.3 on my TV.
I suspect that as the bios never updated that somehow the Bios 3.0.3 has been corrupted and the only Bios available now is what is in the Backup. I suspect that this is bios 3.0.0 . I obviously couldn't update the Backup to bios 3.0.3 as i would need to get the X3 bios into the system before i could do this and flashing with 1959 never worked properly.
Any suggestions or remedies.
Any help would be appreciated. :?