ANSWERED "Header is wrong" Error

tntgoesboom

tntgoesboom

BANNED
Sep 5, 2012
12
0
Oregon
Today I was doing my first Corona DGX Install. I have all the wires hooked up and was reading my nand. (Using NANDx) I happened to get an error that I have never seen. It says "Header is wrong"

Here is my log:

Version: 03
Flash Config: 0xFFFFFFFF
Reading Nand to C:\Documents and Settings\#####\Desktop\JTAG\JRunner\J-Runner v02 Beta (287) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 17:22 min:sec

Initializing nanddump1.bin..
Reading Nand to C:\Documents and Settings\#####\Desktop\JTAG\JRunner\J-Runner v02 Beta (287) Core Pack\output\nanddump2.bin
Header is wrong..
Wrong Version.

After that the program stopped. What happened? What does "Header is wrong" mean? Most important how do I fix it?

This is my first Nand dump of this Xbox.
 
tntgoesboom

tntgoesboom

BANNED
Sep 5, 2012
12
0
Oregon
I am currently re-reading my nand and will post the log if I have any problems again... Still don't understand what is/did cause that error.
 
tntgoesboom

tntgoesboom

BANNED
Sep 5, 2012
12
0
Oregon
Happened again... Here are my logs:

Version: 03
Flash Config: 0xFFFFFFFF
Reading Nand to C:\Documents and Settings\#####\Desktop\JTAG\JRunner\J-Runner v02 Beta (287) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 17:24 min:sec

Initializing nanddump1.bin..
Reading Nand to C:\Documents and Settings\#####\Desktop\JTAG\JRunner\J-Runner v02 Beta (287) Core Pack\output\nanddump2.bin
Header is wrong..
Wrong Version.

---------- Post added at 21:26 ---------- Previous post was at 21:24 ----------
Lizardpcs said:
are you sure it is a 16mb corona?
See here to identify what version corona you have http://team-xecuter.com/forums/showthread.php?t=96752
Click to expand...
It is. I even just double checked.
 
  • Like
Reactions: alteredb
L

Lizardpcs

VIP Member
Mar 3, 2011
335
33
tntgoesboom said:
Happened again... Here are my logs:

Version: 03
Flash Config: 0xFFFFFFFF
Reading Nand to C:\Documents and Settings\#####\Desktop\JTAG\JRunner\J-Runner v02 Beta (287) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 17:24 min:sec

Initializing nanddump1.bin..
Reading Nand to C:\Documents and Settings\#####\Desktop\JTAG\JRunner\J-Runner v02 Beta (287) Core Pack\output\nanddump2.bin
Header is wrong..
Wrong Version.

---------- Post added at 21:26 ---------- Previous post was at 21:24 ----------



It is. I even just double checked.
Click to expand...
We need pictures of your soldering then cause this Flash Config: 0xFFFFFFFF is definitely wrong and means it is not detecting your nand correctly.

Plus it should only take about 2mins to read 16mb nand and yours says 17mins

---------- Post added at 18:29 ---------- Previous post was at 18:28 ----------

does the xbox still work?
 
tntgoesboom

tntgoesboom

BANNED
Sep 5, 2012
12
0
Oregon
Lizardpcs said:
We need pictures of your soldering then cause this Flash Config: 0xFFFFFFFF is definitely wrong and means it is not detecting your nand correctly.

Plus it should only take about 2mins to read 16mb nand and yours says 17mins
Click to expand...
Indeed, I thought that was weird too. None of my Xenon's took that long. Okay what do you need pictures of my soldering on? My DGX v1.1 or my Nand X wires?
 
tntgoesboom

tntgoesboom

BANNED
Sep 5, 2012
12
0
Oregon
Lizardpcs said:
does the xbox still work?
Click to expand...
If I unplug the ground wire on my DGX v1.1 it does. If the ground wire is connected to the ground... Then no.

---------- Post added at 21:33 ---------- Previous post was at 21:32 ----------
Lizardpcs said:
All soldered areas will be your best bet at getting help from someone.
Click to expand...
K, I will upload pictures shortly. Have to wait for my phone to charge in order to take them.

---------- Post added at 21:42 ---------- Previous post was at 21:33 ----------

Currently uploading as attachments and to an Picture upload site atm.

---------- Post added at 21:48 ---------- Previous post was at 21:42 ----------

Here are the pictures:






---------- Post added at 21:51 ---------- Previous post was at 21:48 ----------

Okay, I have fixed it. The problem was the brown wire wasn't fully touching the solder joint. Will post the new logs when fully done.

---------- Post added at 22:00 ---------- Previous post was at 21:51 ----------

Here are the new logs! Thanks to everyone really just Lizardpcs.

Version: 03
Flash Config: 0x00043000
CB Version: 13181
Corona
Reading Nand to C:\Documents and Settings\Bryce\Desktop\JTAG\JRunner\J-Runner v02 Beta (287) Core Pack\output\nanddump1.bin
Cancelled
Version: 03
Flash Config: 0x00043000
CB Version: 13181
Corona
Reading Nand to C:\Documents and Settings\Bryce\Desktop\JTAG\JRunner\J-Runner v02 Beta (287) Core Pack\output\nanddump1.bin
Cancelled
Version: 03
Flash Config: 0x00043000
CB Version: 13181
Corona
Reading Nand to C:\Documents and Settings\Bryce\Desktop\JTAG\Brendon's Nand\output\nanddump1.bin
Reading Nand
Done!
in 2:14 min:sec

Initializing nanddump1.bin..
Nand Initialization Finished
 
Last edited:
M

mhd444

Junior Member
Dec 28, 2012
20
0
you need to improve your skill in soldering , its easy try to use some circuit that you don't need and practice on it and use flux to be more effective .
 
You must log in or register to reply here.