HEEEEELLLLLLLLPPPPPPPP!!!!

[josyc05]

Okay on bank 2 i have everything installed right (Dash,slayers auto installer yada yada yada) but i wanted to edit the color of the flubber screen and now i accidentally flashed the 3.01 flash BIOS screen and now i have NEITHER FlashBIOS 3.01 or 3.03 and cannot flash again!!!!!!!!!!! would the programmer be at all of service?? if so please help me figure this out!!!!!!!!!!!! THANK YOU!

 

[DJBOOBY]

do you still have a working bios on chip
if so you will need flashx2 (its a app for xbox)
ftp it to your apps folder on xbox
as well as the x2 5035 bios in a folder called bios make this on your pc then ftp it over to xbox place it in C:/ folder of xbox
now reboot use flashx2 to reflash the chip do a hard drive flash
you can all so flash it with flashbios to bank 2 if needed
x2 5035 for v1.0 to v1.5 xboxs
x2 5035 v16 plus forv1.6 v1.6b xboxs

flashbios 3.0.1 for v1.0 to v1.6 xboxs but not v1.6b
flashbios 3.0.3 for v1.0 to v1.6b xboxs but not v1.6

 

[josyc05]

Well i reflashed my chip with the programmer and i used the "FlashBIOS 3.01" for all of them and now both banks have the 3.01 screen and now i think i just need to reflash it but do it the right way this time! ALL I WANTED WAS TO EDIT THE FLUBBER THING BUT IT NEVER WORKS FOR ME ANY SUGGESTIONS? THANK YOU SOOOOOOOOOOOOOOOOOOOOOOOOOOO MUCH FOR THE HELP DUDE YOUR ROCK!!

 

[DJBOOBY]

mate the way to do it is
use the x2 5035 bios
x2 5035 for v1.0 to v1.5 xboxs
x2 5035 v16 plus forv1.6 v1.6b xboxs
download x2 config maker HERE
install it on pc
use it to make a x2config file with flubber you wish to use (use a preset colour if you wish) bump up fan speed to 40% as well
save then ftp it over to your xbox E:/ folder
reboot
done

 

[josyc05]

AHAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHH MATE YOU ROCK THANKS A BILLION!!!!!!!!!!!!!!!!!!!!!!