DGX Hello I need some help

[b.mercurio]

Hello I need some help. I have never done this before\
and I first need to know, do I have to have the keys to get my Xbox to play my own copied games. I have already bought an unlocked DG-16D5S Drive and I have also bought the PCB board for the drive and the new DGX v1.1S. First question is can I just flash my unlocked drive with Jungle Flasher without finding the keys, or do I have to install the DGX V1.1S to find the keys and then flash the drive with the PCB board and Jungle Flasher. If I have to do that can someone show me a link or something were it shows exactly how to solder the wires from the DGX V1.1S to my motherboard. I believe it is a Trinity Motherboad. I have been looking on TX's website and online and I cannot find it. All I can find is how to install the DGX V1.0s and not the DGX V1.1s. Please help me.

 

[Joo C]

Yes, u need your keys in order to use the PCB. The DGX1.0s install is no different to the DGX 1.1s. Guide is on the home page or check JRunner images

---------- Post added at 08:01 ---------- Previous post was at 07:59 ----------

By the way, you will also require a JR programmer or NandX to read and write to the motherboard.

 

[b.mercurio]

Isn't there a way to get the keys of the drive itself, and then flash the drive since it has already been unlocked. Why do I have to get the keys off the motheboard. I am just wondering

 

[Joo C]

What do u mean by 'already unlocked'? If it has indeed previously been unlocked thru Sputnik or Kamikaze method, why would you need he PCB to begin with?

 

[b.mercurio]

You see I am very new at this and I didn't know exactly what I needed. I bought an Unlocked DG-16D5S Drive and installed on my Xbox 360 slim 250gb, but when I tried to play a game that I copied it started to load and then disconnected me from Xbox live, and then it goes back to the main screen and reconnects me to the Xbox live, I have even tried to play the original game that was not a copy and it did the same thing. Now I do know I had originally a DG-16D4S Liteon Drive but I bought a DG-16D5S drive. Now I don't know for sure if that is the reason it doesn't load my games right or not. But I thought they were the same drives just had a different number on them.

 

[Antalpromille]

why do you put this in the CR3 PRO support area?

 

[b.mercurio]

I did it by accident and I don't know exactly where I should put it. could you tell me where to where I would get the best answer

 

[Antalpromille]

here? http://team-xecuter.com/forums/forumdisplay.php?f=177

 

[b.mercurio]

Thank you.