Hello, my xbox goes to the original menu after the blue screen with mod chip on

[Garyk1]

Hello everyone, I just installed the xecuter 2.6CE Lite.

All the led's are working fine. And When the chip is enabled a blue xbox loading screen comes up.

It has an Evo X in the corner but after it goes back to the original xbox menu. Also, when the chip is enabled the light around the eject button is red. When the switch is off everything works normal. Pllssssssss helllllppppppp Hopefully I did screw anything up major did I

 

[Fantmx]

You can change the color of the eject LED using the bios. Did you install a dashboard? If not, that's why you are getting the Microsoft Dash. You should flash your bios with 5032, it is more stable and has more features than M8.

 

[Garyk1]

It doesnt have a dashboard, shoot. It has some Evo2 Bios or something like that. Should I put in a new bios or just add a dashboard?

 

[Fantmx]

Flash with 5032. You will have to copy the ini file to your Xbox. See the readme file with 5032.

 

[abrocky]

check your xbox version before you flash the bios. if it is a 1.6 or 1.6b then the M8 and M8_plus bioses are required, respectively.

A dashboard is what you are after, look out for slayers 2.6 autoinstaller.

 

[MKChampion]

if you have a 1.6 or 1.6b you're not required to use the m8 bios
the new X2 bios will work on a 1.6 or 1.6b box and has more features with it
all you need is the v16plus version of the bios and flash it to your box

you can check out how to install a dash and other tutorials at xbox-scene.com