GENERAL Help, after flashing, drive is not recognized :(

Status
Not open for further replies.

FernandoMX

Full Member
Sep 24, 2009
54
0
United States
Hello right now i have a Spiderx360 1175 LTU PCB, from what i know, and the store, tutorials, guides, etc... this pcb is compatible with dg-16d5s...

when i connected the drive it was detected as liteon dg-16d4s, i created a CFW with the key.bin and C/R.bin and then just wrote the firmware, locked the drive and sent outro... after this... the drive show no drive properties in jungle flasher but i can still send the intro and get it to vendor....

when i turn the xbox360 on, the drive does not even open the tray.... any ideas?

PD: i dont have a TX PCB because they were sold out...


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Sat Jan 10 14:30:35 2015

This is a Wow 64 process running on 2 x 64 bit CPUs
portio64.sys Driver not Installed
Found 0 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: D: E:
Found 1 CD/DVD drives E:

XECUTER X360USB PRO attached.

Loading firmware file D:\HACKS\XBOX360\JungleFlasher v0.1.96 Beta (323)\firmware\LTU2-1532-v1.0.bin
MD5 hash: 4c153783e9f969f1c392c0d3caf9eac5
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D5S 1532]
Firmware is: LTU2 v1.0

re-parseing file
Loading firmware from buffer
Drive key @ n/a BE202DF0EDF882280724A43CB9092098
Firmware Osig: [PLDS DG-16D5S 1532]
Firmware is: LTU2 v1.0
Key Verification Failed !!
Additional extracts not completed.

Target f/w saved as: CFW para lectora.bin
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
.........
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !


Sending Spi Lock request to Port 0x0000
Spi Status: 0x8C
Sending Vendor Outro to port 0x0000
Sending Vendor Outro to port 0x0000
Sending Vendor Outro to port 0x0000
 
Status
Not open for further replies.