Help Bios Fragged

[tinbiker]

I recently installed an xecuter 2.6 solder, and everything went fine, it booted to the cromwell flashbios and all

I flashed my bios with a disc, the xbox powered off afterwards, then when i turned it on again it fragged on both banks, it still boots fine when the chip is off.

is there any way to reflash the bios / get the cromwell bios back? or am i just screwed?

thanks

 

[GaryMull98]

i get the same but when i have the chip off i get a service error 16, and the led flashes green and red here too

 

[DJBOOBY]

tinbiker did you change your bank setting once you got flashbios screen up then flash chip with bios if not you may have a v1.6 or v1.6b if so there are two diff flashbios on the chip one that works for the v1.6 and other for the v1.6b if you flash over the working one you will have to do a hotswap or buy a programer for the x2 so you can flash it with working bios as well as flashbios for xbox
flashbios 3.0.1 v1.6
flashbios 3.0.3 v1.6b v1.0 to v1.5
bios
x2 5035 v1.0 to v1.5 xbox
x2 5035 v16 plus for v1.6 and v1.6b xbox