[HELP] Bricked JTAG

[extream87]

Hello all, yesterday im in my xbox360 with rgloader and unfortunately i installed dashlaunch. Result = Bricked.
My JTAG is a xenon board.
What i need to buy and do to make it works again.

I have a my cpu key, flashdmp.bin and updflash.bin.

Thanks all

 

[gavin_darkglide]

If you have a copy of the image, you should be able to boot xell, and flash from usb drive. dont forget to unplug power from xbox for at least 20sec before turning it on.

 

[extream87]

Yes but i click in eject to turn on xbox360 and the xell not load.

 

[gavin_darkglide]

If that is the case, you will need a soldering iron, flux, and a nand-x/jr-programmer to reprogram the nand.

 

[john mathews]

its time to send it to a pro then put in a request for service n u will be back in business:biggrin:

 

[Xline]

There no need for a PRO. ? -_-!
gets get a Nandx or Jr Programmer end read a little on the Net.
don't be hard head.
READ READ READ,, that why you have internet READ.

 

[Antalpromille]

get a jrp or nand-x, dump whats on your nand and save it.
write xell to it and boot to get your CPU-key.
use the faulty dump to get your KV and create a new nand, or use a donor nand if this one is completly corupted.

its not harder than that

 

[rick48235]

do you have to have two threads on same thing

 

[extream87]

JR Programmer v1.1 is more cheapest.
My board is xenon this works?

Someone know some tuto for can i see?

 

[gavin_darkglide]

look under nand-x section. the wiring is the same.

 

[nitonito]

dose the xell screen appear and when loading hungs in the middle of loading
or the xell screen do not appear when u press the eject?

if the screen appears but hungs when loading
open the xbox and remove all drives(hdd & cd )

should be able to load the xell
copy updflash.bin to a flash drive
insert into ur xbox and should be able to flash

u can also check this tread how i fixed mine
http://team-xecuter.com/forums/showthread.php?t=145599

hope it help (let know ur result