RGH help: CoolRunner XSVF files for corona Demon

[lio_x]

hallo,
i need help finding the XSVF files for corona Demon
the JRUNNER app wont work when i program the 3_3 xsvf for corona with demon option tick
the coolrunner still tring to glitch when set to stock nand and it wont boot-
when on the glitched nand its boot perfect and when puting the CR on PRG its boot to stock like it should
can some one help or maybe i should put a relay?
please help

 

[lio_x]

where do i need to connect the relay on the demon to get the signal for on and off?
this is a phat demon on corona V1 and the XVSF files isn't good for corona when using JRUNNER
someone knows?

 

[BraveH43]

what dashboard is on the retail nand ?

 

[lio_x]

14719

 

[BraveH43]

try updating retail side to latest via USB or Live (switch cr to prg first obviously) and remember to redump it and create another glitch nand afterwards!

 

[lio_x]

try updating retail side to latest via USB or Live (switch cr to prg first obviously) and remember to redump it and create another glitch nand afterwards!

ok, it didnt work
i programed my CR with the demon trinity xvsf file and it boot to stock- i updated to 15574 via USB and redumped it and created new image from it

i noticed when i program my CR with DEMON tick on it saying this:
"Programming Coolrunner
C:\Users\Liran\Desktop\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\common\xsvf\corona.3_3.xsvf
sending xsvf to demon...
Done
"
when i choose trinity with demon it takes the TRINITY_EN file and not the TRINITY file
with the corona-it always takes the same file

p.s: of course i have the latest 2.82 jrunner-it just don't updating the name of the folder

 

[krayziexploiter]

If you look at the jrunner\common\xsvf folder you will notice there aren't any corona_en files. The program just uses tho normal ones. The good files still aren't released for some reason.

 

[lio_x]

yes, i know- stefanou nick is already working to fix this
i just hope it won't take too much time

 

[lio_x]

update
there is a new JRUNNER update 283
stefanounick updated me thet the corona XVSF files have already been updated and are demon ready

i want to thank him and all who have been involved in this great app

if someone interested i can upload photos of wire install of phat demon on corona V1
thank you

 

[Fisticuffs]

if someone interested i can upload photos of wire install of phat demon on corona V1
thank you

Or you could start a thread with the pictures for anyone who might need it

 

[lio_x]

update:
the files didnt work
the corona files arent demon enabled yet
someone knows how to install relay on a demon?

 

[crash884]

Is there any updates on when the EN files for Corona will be available?

 

[lio_x]

no there isn't- no one giving support
they will release it soon as the corona QSB for slim demon will be out but its late
i think they dont want pp making wire installs and buy their QSB

 

[BraveH43]

no there isn't- no one giving support
they will release it soon as the corona QSB for slim demon will be out but its late
i think they dont want pp making wire installs and buy their QSB

Its being looked into! - no-one is holding off release.
:facepalm:

 

[lio_x]

sorry to make wrong assumptions
i'm kind of desperate right now:biggrin:
and no one answer my questions

 

[lio_x]

halo, i see the corona QSB for demon is out finally, but there no new update for corona_en files
anyone got it working?

 

[LoneWolf913]

Not yet, but the Corona timing file IS open source now So I'm adding in support myself right as I type this. Should be one or two lines of code, just that my VHDL is rusty so I'm having to re-learn as I go. To be honest the Corona I just did boots fast enough that there's no need to disable the CR, it starts in 3-4 cycles maximum and the stock nand still boots fine..but it's a good learning experience.

 

[lio_x]

I added a relay to the EN point and its working but its affecting the glitch- must be taking to mach power with the demon and oscillator and relay all put together
Im going to test an alt 5V point -it's strange that TX don't have support for this by now

 

[LoneWolf913]

I added a relay to the EN point and its working but its affecting the glitch- must be taking to mach power with the demon and oscillator and relay all put together
Im going to test an alt 5V point -it's strange that TX don't have support for this by now

I've just gotten it working with nothing but edited code. Skip the hassle of a relay. Only thing I do need to still figure out is what the 1-1, 2-2, etc are changing in the source file, I assume timing window, but the comments are rather cryptic..

 

[lio_x]

If its open source why don't you just inject your code to all timing files
I need the 3_3 file if you got that one working