DGX HELP DGX WON'T GLITCH

joker2009

VIP Member
Dec 21, 2012
281
0
rhode island
i HAVE BEEN TRYING TO GET MY CPU KEYS WITH NO SUCCESS
everytime i upload it fails or i get improper security
is there another way around this so i can post pics?
 

jligg

VIP Member
Mar 16, 2011
1,062
88
Cincinnati Ohio
Your probably not following the posting rules on pictures. They have to be under 1mb and the correct format

Sent from my ADR6400L using Tapatalk 2
 

jligg

VIP Member
Mar 16, 2011
1,062
88
Cincinnati Ohio
Not to be a d**k but that's some of the worst soldering I've ever seen. I would send it off to a pro before you ruin the console. It's gonna get even harder when you put the coolrunner in and have to keep making adjustments to the smaller points

Sent from my ADR6400L using Tapatalk 2
 

joker2009

VIP Member
Dec 21, 2012
281
0
rhode island
Not to be a d**k but that's some of the worst soldering I've ever seen. I would send it off to a pro before you ruin the console. It's gonna get even harder when you put the coolrunner in and have to keep making adjustments to the smaller points

Sent from my ADR6400L using Tapatalk 2
not installing a coolrunner just trying to get cpu keys
and i didnt clean up after myself so thats why it looks like S**t,lol
 

BL4K3Y

VIP Member
Top Poster Of Month
Jul 7, 2010
13,687
118
Colne, Lancashire (UK)
Why do you have an additional wire soldered to the "POST_1" pad?

If you are using the POST Fix adapter, you DO NOT need to solder to the alternate POST_OUT1 point.
 
Last edited:

XEX DriZzy

VIP Member
Feb 22, 2012
189
0
Wisconsin, USA
What exactly is your problem right now? Be more specific of what you have done and what's going on.
 

jligg

VIP Member
Mar 16, 2011
1,062
88
Cincinnati Ohio
No man I mean how the wires are soldered. Lot of wire out of the insulation, all balled up together. And when you get blobs of solder that look like a ball sitting on something usually means it's not joining correctly

Sent from my ADR6400L using Tapatalk 2

---------- Post added at 21:45 ---------- Previous post was at 21:44 ----------

If your dgx is not even attempting to glitch then your soldering is f*cked.

Sent from my ADR6400L using Tapatalk 2
 

XEX DriZzy

VIP Member
Feb 22, 2012
189
0
Wisconsin, USA
No man I mean how the wires are soldered. Lot of wire out of the insulation, all balled up together. And when you get blobs of solder that look like a ball sitting on something usually means it's not joining correctly

Sent from my ADR6400L using Tapatalk 2

---------- Post added at 21:45 ---------- Previous post was at 21:44 ----------

If your dgx is not even attempting to glitch then your soldering is f*cked.

Sent from my ADR6400L using Tapatalk 2
True true.... If he wants to ruin his console let him go for it. He should be aware of the consequences before attempting it. If we figure out his problem maybe we can save him from ruining it.
 

P Z U

VIP Member
Dec 14, 2012
165
0
California
Not to be a d**k but that's some of the worst soldering I've ever seen. I would send it off to a pro before you ruin the console. It's gonna get even harder when you put the coolrunner in and have to keep making adjustments to the smaller points

Sent from my ADR6400L using Tapatalk 2
I've seen worse.
 

joker2009

VIP Member
Dec 21, 2012
281
0
rhode island
Why do you have an additional wire soldered to the "POST_1" pad?

If you are using the POST Fix adapter, you DO NOT need to solder to the alternate POST_OUT1 point.
the needle on the post out adapter is broken off so i used a thin wire and checked it with a multimeter to verify that its connected. Then I used the adapter just to solder to it and it has the same readings from the multimeter
 

joker2009

VIP Member
Dec 21, 2012
281
0
rhode island
True true.... If he wants to ruin his console let him go for it. He should be aware of the consequences before attempting it. If we figure out his problem maybe we can save him from ruining it.
everything is connected i checked all solder points and on the dgx
Plus I am able to read the nand so all is good

---------- Post added at 21:59 ---------- Previous post was at 21:57 ----------

What exactly is your problem right now? Be more specific of what you have done and what's going on.

problem is i am unable to get the cpu key and i followed everything in the guilds plus googled more
but my dgx isn't blinking nor the console so i dont know whats going on