[HELP] Falcon glitching but doesnt boot need help with post code

[futuredj]

Console Type: Falcon
NAND size: 16
Dashboard version: e.g 2.0.16537
CB version: 5774

J-Runner log:


POST output from J-Runner:

Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 01
Post 80
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 01
Post 80
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post D0 - CB_A entry point reached
Post D8 - RC4_DECRYPT_CB_B
Post 15 - FETCH_OFFSET
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 01
Post 80
Shutdown
[/QUOTE]


Description of problem:

falcon doesnt glitch i will post pictures of soldering/r-jtag but by the looks of it the help i need is in the rater log!
Ive tried every dip setting and resistances but to no avail
if you think its to do with the soldering i will add pics


Was the console working before you started: Y

 

[chase]

post output is all wrong.. which means post_qsb could be badly soldered or could be a number of things

where are your pictures and j-runner log ?

pictures are always needed.. not when someone things the fault may be due to soldering