GENERAL Help Fixing Slim Mobo

[ntegehussein]

Need help fixing this Mobo

I only have Conductive pen and of course other necessary tools.

I just wanted to know if using the basic soldering tools+conductive pen would help

me repair this mobo. Please advise, and help me with guidelines and illustrations if possible. Thanks.

 

[Antalpromille]

you need more than a conductive pen and basic soldering tools to fix that.
if you managed to do that damage and need to ask how to fix it, it tells me that youre not the guy for the job!

 

[stmem]

a decent iron and flux would of helped prevent that im sure, try and find the traces but itll not be easy

 

[Antalpromille]

a decent iron and flux would of helped prevent that im sure, try and find the traces but itll not be easy

you can actually see the trace on the picture, but if you cant solder to the pad without ripping it how the hell would you solder to the traces?

 

[stmem]

you can actually see the trace on the picture, but if you cant solder to the pad without ripping it how the hell would you solder to the traces?

true but if he bought it second hand then its someone elses mistake

Depending on board you may not need all those points anyway

 

[ntegehussein]

you need more than a conductive pen and basic soldering tools to fix that.
if you managed to do that damage and need to ask how to fix it, it tells me that youre not the guy for the job!

I bought 2 of these mobos with the same problem. Just wanted to find any help I could get to fix them.

please advise.

 

[nofeloniesyet]

jump c5r11 with a tiny piece of kynar wire from trace above and below where cr511 pad was,and bam ur done from what i can see,sont worry bout the post points.and sorry buddy but a conductive pen is not going to work for this. expose some of the trace with a knife or sandpaper real fine grit,and use some flux to get some solder tinned onto the traces,then tin some kynar and heat it onto the traces.