LITEON DG-16D4S - SLIM help flahing fw

[m4nik]

i have been trying to flash my pcb for days now
i cant be recognised by jf only if i intro it
i have purchased the xusbpro to read my dummy which i have saved
but i cannot write back the fw
the drive is unlcked and is the 03 mxic chip
this is the only way i can get it to flash is with a via 6247 pci card and the sputnik switch to unlock
if i try to flash with switch in the normal position jf just hangs at writing bank 0: .
here is my jf log

JungleFlasher 0.1.92 Beta (304)
Session Started Wed Apr 18 12:25:10 2012

This is a Wow 64 process running on 12 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 6 I/O Ports.
Found 0 Com Ports.
Found 2 windows drives C: D:
Found 0 CD/DVD drives

Loading firmware file C:\Users\M4NIK\Downloads\my slim key\hacked.bin
MD5 hash: f158fa815231fad8a52391e2f5afc82f
Drive key @ n/a 4931C8CA5951E4C950Exxxxxxxxxxxx
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 3.0
Sending Vendor Intro to port 0xEC00
Status 0x7F
Re-sending Vendor Intro:
......
Serial flash found with Status 0x72

Sending Device ID request to port 0xEC00
Spi Status: 0x08
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0xEC00
SPi flash found with Status 0x72

Sending Chip Erase to Port 0xEC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: Dump Failed

this is my log with usbpro and differnt jf and lt2.0
with switch in normal position

JungleFlasher 0.1.91 Beta (300)
Session Started Wed Apr 18 12:47:56 2012

This is a Wow 64 process running on 12 x 64 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: D: E:
Found 0 CD/DVD drives

Loading firmware file C:\Users\M4NIK\Downloads\slim\Dummy.bin
MD5 hash: 0a098d91ac464e656115561992f3f248
Inquiry string found
Identify string found
Drive key @ 0xA030 4931C8CA5951E4C950xxxxxxxxxxxx
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: SlimKey Extract
Auto-Loading firmware file D:\New folder\JungleFlasher.0.1.91.Beta(300)\JungleFlasher v0.1.91 Beta (300)\firmware\LTPlus-0272-v2.0.bin
MD5 hash: e89c22ad8eecf634a3b27510901999c8
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
............
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x9C
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Writing target buffer to flash
Writing Bank 0: .

thanks

 

[doe1200]

use your usb pro intro pcb put the switch to unlock,then press the spi button to change spi status from 0x8c locked to 0x00 unlocked jungle flasher will beep when spi changes move switch back to normal then write frimware you might have to intro again before you write,once frimware is wrote to pcb outro then intro again press the spi button again to lock pcb then outro

 

[m4nik]

thanks for the swift responce
i have been trying that sequence alot of times
here is my jf log using your recommendation

the only difference is that when i put the switch in the unlock position a message appears telling me to switch to normal and press ok
and the only thing i get in the spi box is 0x00
i have even tried to lock the drive again to restart the process but a message connot lockshow so i am unable to start from scratch


JungleFlasher 0.1.91 Beta (300)
Session Started Wed Apr 18 13:24:27 2012

This is a Wow 64 process running on 12 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 6 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: D: E:
Found 0 CD/DVD drives

Loading firmware file C:\Users\M4NIK\Downloads\slim\Dummy.bin
MD5 hash: 0a098d91ac464e656115561992f3f248
Inquiry string found
Identify string found
Drive key @ 0xA030 4931C8CA5951E4C950Exxxxxxxxxxx
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: SlimKey Extract
Auto-Loading firmware file D:\New folder\JungleFlasher.0.1.91.Beta(300)\JungleFlasher v0.1.91 Beta (300)\firmware\LTPlus-0272-v2.0.bin
MD5 hash: e89c22ad8eecf634a3b27510901999c8
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

XECUTER X360USB PRO attached.

Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
.............
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x9C
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Sending Vendor Intro to port 0x0000

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0xFF
Manufacturer ID: 0xFF
Device ID: 0xFF
Flash Name: Unknown type
Flash Size: n/a
Sending Vendor Intro to port 0x0000

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0xFF
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Done !

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Writing target buffer to flash
Writing Bank 0: .

 

[doe1200]

have you tryed a different resistor setting on the switch,on your 1st jungleflasher log spi status was showing as locked 0x8 and your 2nd is showing as 0xff could you post a pic of switch install on pcb please also try to force lock the drive intro and press ctrl shift and f11 keys

 

[m4nik]

fixed
as u stated it was the resistor switch
in this link th pic was showing 2nd switch down the rest up
but in the install pic it was different
switch 2 up the rest down
thanks so much for the help

 

[doe1200]

no probs glad you got it sorted