HELP! Flashed BIOS, then its Flashing Red & Green

[TWelsh216]

So I'm having a problem.


This is the first time I have modded an Xbox. I installed the chip and eventually got to the blue flash BIOS screen. I followed the FlashBIOS v3.03 Tutorial (Rev 1.00) so iunbelievably carefully. After the BIOS was flashed via CD-R, I restarted my Xbox and it went to the On off on off on F.R.A.G thing a lot of us have seen. Someone thought that maybe I had set my switches to the 0-1-0-0-0 setting while flashing, which would load this bad BIOS over the existing one on the chip (as far as I understood ) but I was sure I had set it to 1-1-0-0-0. I decided to try and start it up with the switches at 0-1-0-0-0, and it started up to the blue flash bios screen. So I think that this is good news. But now do I risk running the same BIOS onto this, or how do I get to… what should I do next? How can I make the normal settings work? Oh yea, and I cannot load the backup BIOS by pressing eject & power with all the switches set to off.



I have a V1.6 with an X3chip and tried to flash using X3 3029.bin

Thanks for the help guys

 

[drgnhilord]

ok just set your switch back to on,on,off,off,off and press and hold the power and reset button at the same time and hold them tell the X turns purple then reflash but i would also download another bios file the one u have might be bad

 

[TWelsh216]

Okay, then my next question would be: Is there any reason that the backup BIOS would not load by holding both buttons at the same time? I have no purple light. I have another modded Xbox, and it is real easy to load that backup bios on that one by pressing both buttons. So I know it's not like I'm simply not doing it right. But for sure, I should not try and load the BIOS onto the flashBIOS screen that comes up when the switches are 0-1-0-0-0, right?

 

[TWelsh216]

Problem solved, thanks guys!