HELP FLASHING BIOS!!

[IndianaNeon]

i burnt it to dvd+r and loaded into xbox froze at xbox screen with microsoft at bottom...

 

[DJBOOBY]

it should work burn at a slow speed may help 2x max finalize dvd as well

 

[IndianaNeon]

burnt at slow speeds still not reconizing disc... am i burning it wrong?

 

[DJBOOBY]

what burning program are you useing

 

[IndianaNeon]

i was using nero... but now im trying dvd decrypter... since in the nFO on the Auto Installer deluxe it asks to use dvd decrypter so im going to test that...

 

[IndianaNeon]

im gettin very mad... still saying cant reconize disc... dammmit!

 

[IndianaNeon]

1) Burn the ISO to an appropriate media, depending on your Xbox DVD-ROM Drive.

Note: DVD Decrypter is recommended for burning the ISO on to a DVD.

2) Insert CD/DVD into the Xbox, then boot it with your modchip or softmod.

 

[DJBOOBY]

in dvd decrypter go into mode at top left of program set to iso write W then burn

 

[IndianaNeon]

I 06:41:27 Write Mode: DVD
I 06:41:27 Write Type: SAO
I 06:41:27 Write Speed: 2x
I 06:41:27 Link Size: Auto
I 06:41:27 Test Mode: No
I 06:41:27 BURN-Proof: Enabled
I 06:41:27 Filling Buffer...
I 06:41:28 Writing LeadIn...
I 06:41:34 Writing Image...

I 06:44:14 Synchronising Cache...
I 06:44:14 Closing Track...
I 06:44:15 Finalising Disc...
I 06:44:48 Operation Successfully Completed! - Duration: 00:03:20
I 06:44:48 Average Write Rate: 3,127 KB/s (2.3x) - Maximum Write Rate: 3,307 KB/s (2.4x)




loaded into xbox .... restarted... went to rox my box screen then to the next Xbox screen and froze....

 

[DJBOOBY]

xbox are picky when it cames to dvd+-r and cd-rw try diff media try a cd-rw or try dvd-r diff brand or you can download dash and ftp it to your xbox
you have not changed setting in x3 yet

 

[IndianaNeon]

step me threw ftping it into my xbox

 

[IndianaNeon]

anyone?

 

[DJBOOBY]

download avalaunch0484.rar
1. Extract the avalaunch0484.rar
2. Open the folder that was created and rename the default.xbe file to avalaunch.xbe
3. Open up FlashFXP and navigate to the C:\
4. Copy the default.xbe that you renamed to avalaunch.xbe in step two to the root of the C:\ partition of your xbox's harddrive, as well as the media folder, shoutcast folder, and avalaunch.xml. *note make sure all of these go in the root of C:\ and not in a subfolder.
to ftp to xbox you will need to go into x3 config live again go into setting then network settings set static ip to 192.168.1.2
the sub net should be 255.255.255.0 gateway 192.168.0.100 now go back to the frist page on x3 config you should see ip you set 192.168.1.2 now turn off xbox hookup to you routor with len cable not cross over unless you do not have routor next with routor turn on then turn on xbox and hold white button to get x3 config once you have x3 config go to your pc start flashfxp software goto the lighting bolt on the right side click on quick connect now type in 192.168.1.2 then as user name type x3 password is x3 hit connect you now have to tranferr the media folder, shoutcast folder, and avalaunch.xml.as well as avalaunch.xbe then reboot xbox setup x3 like i told you but set the dash folder to C/ not E/
hope this works
boobs

 

[IndianaNeon]

were can i get avalaunch0484.rar?

 

[IndianaNeon]

i got ... Avalaunch.0.49.3

 

[DJBOOBY]

that will do you can update over internet
after you get dash installed and are back in x3 config bios set the time and then go into eeprom tools then save eeprom to x3 this is good to do may never use but allways there if needed

 

[IndianaNeon]

ok i got it connected... were do i transfer all files to main root dir?

 

[IndianaNeon]

because i see a admin folder, c,d,e,f,x,y and z folder...

 

[DJBOOBY]

we put them in c/

 

[IndianaNeon]

[L] List Complete: 793 bytes in 0.02 seconds (51.6 KB/s)
Transfer queue completed
Transferred 59 files totaling 6.28 MB in 5.97 seconds (1,595.3 KB/s)


ok i got it done...