Help flashing Samsung with Xtreme 5.2 to the latest iXtreme

[ciaccini]

Hi, I flashed my drive a while back to the xtreme v5.2, I was offline so have yet to be banned and hoped flashing to a new iXtreme firmware might help!

I believe the latest is:
iXtreme 1.2B

My question is how do i go about doing this?

I guess its very simular but am concerned about having to restor origional firmware, if i need new software to flash and generally where to get the new stuff if needed.

I had a look in the tutorials section and saw now new tutorials so presum its the same.

I would be very greatefull for any help or links given.

Thanks!

 

[zerach]

Re: Help flashing Samsung with Xtreme 5.2 to the latest iXtr

i flashed back to orig before putting in the ixtreme but i dont think you have to.to flash back orig use this.

Restoring your original firmware
If you ever wanted to restore your original firmware for what reasons, then all you would need to do to
restore your original firmware is use the directions for upgrading firmware, to disable FirmGuard, so
you are able to flash your original firmware to the Xbox360 DVD drive.
Few things you need to keep in mind:
- Be sure after you’ve created the boot disk with Xtreme Boot Maker, to transfer your original
firmware you have backed up earlier, to your boot disk. Make a folder in Backups /[7-digit
serial]/[5-digit serial]/ on the bootdisk you have just made, and copy over your orig.bin.
- You can’t use xRead or xFlash to restore original firmware. When you are ready to flash and
you have disabled FirmGuard, in this case you have to use the command :
MTKFlash w /m /sata Backups/[7-digit serial]/[5-digit serial]/orig.bin

after that use iprep to make your boot flash then flash.you will then run idump and iflash.

i did not have good luck with the newest firmware v1.2 revc.
i am still using v1.2 and it does great.