Help. I flash whit the wrond file

[kaffi]

Help. i flashed whit the wrong file. I flashed whit the file for 1.6 xbox on a xbox that need 1.0-1.5 what do i do? the xbox flashes green red and wont show any thing on the tv

 

[adam.giles]

Boot to back up , then flash with the correct bios file.

 

[kaffi]

how do i do that?

 

[b0y]

hold the Power and Eject buttons at the same time until you get the Flashbios screen.

-b0y

 

[kaffi]

hmm. it dosent start when i do that
and when i start it whit the chip it starts and turn off 2-3 times

 

[adam.giles]

boot to your other 1mb bios bank

 

[kaffi]

i swich from bank 1 to 2 and the same thing happends.

 

[b0y]

Try to boot to backup without the switch plugged in.

-b0y

 

[kaffi]

nop. nothing happend.. hmm..

 

[adam.giles]

What switch settings are you using?

 

[kaffi]

chip ON
Protect OFF
Bank 1

 

[kaffi]

http://www.consoleworld.gr/mode%20chip/xbox/xecuter%202.6%201.6.htm chip like this one

 

[adam.giles]

That's a 2.6! This is the X3 forum.

Start again in the right forum.

 

[DJBOOBY]

boot in bank2(should have flashbios3.0.3) then reflash bank 1 with right bios
x2 5035 for v1.0 to v1.5 xboxs
x2 5035 v16 plus for v1.6 v1.6b xboxs

 

[Poida^]

No wonder I was getting confused....

Please know what you are getting when you buy something!

1. You don't have a backup bios. Power+Eject will do nothing for you.
That is an X3 function, not X2.6.
2. Bank 2 might not work since you have a 1.6 and that will work with a 1.6b.

If all else fails, you can get a programmer to flash your chip from your PC.