ANSWERED Help Jasper 512mb Shall i go on? Weird issue.

[PCP008]

Ok guys so this is around my third jasper i have done for a customer however some really weird stuff is going on, ok so firstly i read the nand i realised i had some 250 blocks in CMD around 20.

So i decided to still let it finish and then re-wire, despite my wiring being perfectly fine i cut of 7 legs of diodes and made sure they went entirley through the board then cut and stripped new wire for my Nandx to mobo cable. Now my soldering was 100% fine .. and so i begin to read again to see 250 blocks in CMD.

I let it finish i then compare and i get 2 non matching blocks.

Finally i read the nand again for a third time and i again get blocks in CMD while reading.

Now here is the freaky bit, i compared the Nand3 with my Nand2 and i get 2 non matching blocks THEN i compare Nand3 with Nand1 and get no matching blocks.

Utterly confused of what i should do from this point onwards. :facepalm:

Image of ALL Nands when i put them into 360 Flash tool -

 

[Martin C]

Should you continue - no.

non-remapped bad blocks is a stop point.

What bothers me is people asking for help on customers consoles. If you're having trouble with a customer's console, do the half-decent thing and post in the request a service. Someone who can mod consoles will get back to you.

 

[PCP008]

Martin if your about please take a look this, thanks.

---------- Post added at 11:44 ---------- Previous post was at 11:43 ----------

Ok sorry, ive never done a BB Jasper before what do you mean by i shouldnt be doing customers console's ? My ebay feedback seems to show i am not a complete idiot anyway thanks will take a look at a sticky post.

EDIT: Im new to the forums sorry Martin, never knew there was a section for that give me some time is it possible you being yourself could give me your aim or is this stupid to ask being a "Junior Memeber", again i apologise very new to this forum.

 

[garageinc]

your charging for the job matey so its up to you to know what you are doing or pay someone to bail you out who does. repairers/installers such as yourself give the good ones a bad name. no i'm not as diplomatic as martin incase that slipped by you. don't suppose your based in norwich lol

 

[PCP008]

This is the first of 6 ive come across a issue with, i even fixed the console im no idiot roaming in deep water i just need a bit of help does no one have the courage to say yes i can help you rather than beat me down and drown me.

Yes i know i should know how to fix this, but i dont im admitting it. As when i go into 360 flash tool it says i have No bad blocks.

 

[Martin C]

Thing is, we have stickys and tutorials that cover a whole range of issues and steps and by your own admittance, you didn't read ANY of them before posting.

If you're charging people money to do their consoles, as garageinc rightly says, you should know what you're doing. If you don't, now is a great time to start to read.

 

[PCP008]

Will take onboard that advice and i assure you its only in this particular section i have ever really struggled with and asked for help when coming to customers console's now i just need to do a bit of searching and find the section your talking about thanks.

 

[garageinc]

doesn't make taking the job on when you cant do it any better though mate. your answer is here already you just need to look for it, the fact you are doing this for a customer means no spoon i'm afraid. though someone will probably help in the end, they usually do:crazy:

 

[PCP008]

Like i said to Martin im looking for the forum he said earlier, no need to keep going on.

 

[garageinc]

sorry mate i wasn't going on was just replying at the same time as martin and i'm a slow ass lol. good luck in the hunt and working this out.

 

[PCP008]

Thanks dont reckon you could help me out with what section i should be looking to find im also a bit of a slow one and cant seem to find it on the homepage.

**we all start one time or another.

---------- Post added at 12:10 ---------- Previous post was at 12:04 ----------

Ok so i managed to find a forum in which someone had the same issue as me and the block did not show up in 360 flash tool and so they continued and it worked but im wondering if this would be the same case for me as Martin you did say early specifically not to continue.

 

[garageinc]

rgh or jtag sections somewhere, i know its there after reading it but has been shifted about a bit lately so not exactly sure which one.

---------- Post added at 19:12 ---------- Previous post was at 19:11 ----------

its a sticky i believe

 

[PCP008]

No i know Martins sticky just i cannot seem to see any visible blocks in 360 flash tool.