Help! Jasper rgh screw up

[MADD_MAXX]

ok, I tried to rgh an old Jasper mobo I just had lying around. I knew the dash was to late to jtag but I did'nt know that 12625 could not rgh. I soldered all the wires read the nand and saved. When I went to create the ecc dash 12625 was not an option on rgh so I went to the next dash like an idiot. I wrote the ecc to the jasper(btw its bb 512) and unplugged everything and tried to boot xell. It would not boot I have tried changing wire to cpu reset(12" rg-58, 12" lmr-100& just regular wire). The green light on the coolrunner v3 flashes bright about every ten seconds or so.My question is, have I screwed this mobo up or can I somehow write the origional ecc back to the nand?

 

[oO Elite Oo]

please fulfill support template while play my Infamous Second Son here

 

[john mathews]

http://team-xecuter.com/forums/showthread.php?t=96474 fill this out needs pics of soldering and coolrunner and logs

 

[MADD_MAXX]

Ok, My take me a bit to get all the info. thanks

 

[stevety129]

take all the wires out except the nand ones and write the original nand back to the board and then see if it boots up ,if it boots up OK then start again

 

[MADD_MAXX]

take all the wires out except the nand ones and write the original nand back to the board and then see if it boots up ,if it boots up OK then start again

Do I need to take the wiring completely off the mother board or just off the coolrunner?
I'm trying to upload the pics that i took of my soldering but it keeps freezing up on the attachment manager. Also i can't find the log file the log folder in j-runner is empty.

 

[MADD_MAXX]

Hope the pics are clear enough i had to use a magnifying glass and flashlight along with my phone. the best i could do.

TX Product(s) used:J-R Programmer V2, CR REV.C
Console Type:Jasper
NAND size: 512
Dashboard version: 2.0.12625
CB version: 6750
Screenshot of NAND details from J-Runner:
J-Runner log:Could not locate
updflash.bin log (if applicable):
Image of Coolrunner:
Images of close-up soldering to motherboard:

 

[Martin C]

Closed - this is a TX product support site. We do not support fake/clone chips. Contact your supplier and let them know you've been sold a fake.