LITEON 9504 HELP! liteon 0272 not recognized after power went out

H

hardrokr4lyfe

Junior Member
Oct 7, 2011
10
0
Rockford, IL
So I was able to slimkey my 0272 to get my dvd key. Im using ck3i and x360usb pro. I then click intro / device id. That went well, put my drive into vendor mode. I then click the spi status to unlock the drive. I put my switch to unlock at 10 ohms, then the breaker that controls my computer flipped causing my computer to shut down in the spi process. Now JF doesnt recognize my drive. I tried re clicking intro / device ID again but no luck? Is my drive bricked now? I hooked it back up to my xbox and I can open and close the tray but even with a game in the drive i get open tray...any suggestions?
 
M

MightyShots

VIP Member
Aug 31, 2011
305
0
Walsall, United Kingdom
1almasmith said:
Iam having same problem. When I was doing intro my computer ran out of power which I did not have my power cord hook up to my computer durning clicking intro like he did it was processing the power went out hook back up no drive recognized did like he did intro lots of time but nothing. Everything hook up right I flash a lot just having problem when flashing when intro and power goes out or a stoppage of the intro process. 0225 drive
Click to expand...
you will need to start your own thread, hijacking is not allowed, but try the steps above if they dont work start your own
 
S

sp4rkst4rt3r

VIP Member
Oct 9, 2010
2,126
0
North-West (UK)
1almasmith said:
Iam having same problem. When I was doing intro my computer ran out of power which I did not have my power cord hook up to my computer durning clicking intro like he did it was processing the power went out hook back up no drive recognized did like he did intro lots of time but nothing. Everything hook up right I flash a lot just having problem when flashing when intro and power goes out or a stoppage of the intro process. 0225 drive
Click to expand...
You need to start your own thread this is Hi-Jacking an against the rules :mad2:

@OP have you tried Slim Lite-on Badflash Recovery from the JF tut? Download it here http://hotfile.com/dl/129074413/6f8714b/jftut1.4.4.rar.html go to page 204
 
H

hardrokr4lyfe

Junior Member
Oct 7, 2011
10
0
Rockford, IL
Well i tried searching for this in the forums and couldnt find anything that really matched my problem so i apologize. As for all the actual answers, I tried flipping the switch back to normal and nothing. Im not finding the slim liteon bad flash recovery options in JF either. I had joesinger47 help me for a while last night and neither one of us could come up with a solution. So i basically just ordered the unlocked PCB from xconsoles and im just gonna do it that way. Im not sure what went wrong but nothing seems to be working
 
You must log in or register to reply here.