RGH Help making rgh image from CPU Key and LDV

[2615863]

Hey everyone, I am having some trouble making a nand file from just the CPU key (34CCAA0193D793FBD1E28F6311015E2B) (and LDV 10)..

I tried using martins guide, although his is to recover the full nand.. I just need to make a trinity RGH image for my slim (it doesn't have a drive, and its banned so I just need rgh). Also, the previous dash was 15574

I have made a couple images, but I can't get them to boot, so I was wondering if someone could make one for me off the info above.

Heres that nand I made: http://www.filedropper.com/updflash


edit: I know I should have experience in this, but I have never done a board without the original nand dump, nor have I lost the original nands.. Also, I read the Jrunner guide too and just can't get it to work

 

[Martin C]

You've not actually stated what you've tried.

Bear in mind that if you want someone to do it for you, your post should be in the 'request a service or item' section of the forums, not here.

 

[2615863]

Oh sorry, I extracted all the files from another nand dump (KV, FCRT, and the SMC clean from your guide) and ran it through Jrunner in create nand without nanddump. I changed the ldv to 10, and thats it..

I must be missing something

Edit: I would like someone to make it, because they would make it right. But I would also like to learn how to do it incase it happens again I won't have to make another thread..

 

[Martin C]

How can you summise in one line what you did, when the guide has multiple steps?

You're also not stating how it's not working.

 

[2615863]

How can you summise in one line what you did, when the guide has multiple steps?

You're also not stating how it's not working.

Well,
1. I took a dump from another slim
2. I added the cpu key from that other slim
3. I selected the tools, and extracted yhe kv_dec.bin and the smc_dec.bin
4. I renamed them to SMC.bin and KV.bin
5. I copied them to the data folder of xebuild
6. I chose 15574 in the dash version
7. I selected glitch instead of retail
8. I selected advance/create a image without nanddump
9. I put ldv 10
10.I flashed it to the 360 that doesn't have a nanddump and it glitches but never boots..

 

[Martin C]

Did you also select NOFCRT in the J-Runner options?

Did you remember to change CPU key to that of your new console before building?

Does XeLL boot when you press eject? If not, there's a much bigger problem.

 

[2615863]

I selected no fcrt.bin, and xell won't boot. also I tried the dgx xell and that booted up

 

[talby71]

you didnt answer this one
Did you remember to change CPU key to that of your new console before building?

 

[garrom]

I'm exactly the same problem posted on another topic, I tried to solve the same way without success, I will follow this to solve together

i used vital files from another slim corona 4gb, and the correct cpukey extracted using dgx, but no glitch

 

[2615863]

you didnt answer this one
Did you remember to change CPU key to that of your new console before building?

I did, and my bad I thought I had said this..

 

[Martin C]

I'm exactly the same problem posted on another topic, I tried to solve the same way without success, I will follow this to solve together

i used vital files from another slim corona 4gb, and the correct cpukey extracted using dgx, but no glitch

You have a different problem - you can't read the rules of the site:

#5 NO THREAD HI-JACKING
Please do not reply to another person's support thread unless you want to help or have information that can help. If you reply to someones thread and it has nothing to do with their problem, this is called THREAD HI-JACKING and is frowned upon by the entire community. Unless you want to help the original poster with his or her problem do not reply in that thread. If you require support create your own thread.

---------- Post added at 01:59 ---------- Previous post was at 01:59 ----------

I did, and my bad I thought I had said this..

So can you post your fuses.txt from your console as well as the updflash.bin.log file?

 

[2615863]

I will work on this later, have exams this week.

 

[15432]

http://depositfiles.com/files/8sl84ls10

 

[2615863]

So can you post your fuses.txt from your console as well as the updflash.bin.log file?

I am back to this slim as I finally got some free time.

Here are the fuses:
fuseset 00: c0ffffffffffffff
fuseset 01: 0f0f0f0f0f0ff0f0
fuseset 02: f0ff000000000000
fuseset 03: 34ccaa0193d793fb
fuseset 04: 34ccaa0193d793fb
fuseset 05: d1e28f6311015e2b
fuseset 06: d1e28f6311015e2b
fuseset 07: ffffffffff000000
fuseset 08: 0000000000000000
fuseset 09: 0000000000000000
fuseset 10: 0000000000000000
fuseset 11: 0000000000000000

I don't have the updateflash.bin log anymore

http://depositfiles.com/files/8sl84ls10

I tried this image but it wouldn't boot.. I can boot xell easily with my dgx, just not the coolrunner..