help me figure this out

cameljuice

Noob Account
Feb 20, 2007
3
0
i have a v1.0 i installed 2.6ce works good, i need to flash was going to flash x2_5035 on bank 1. (is this correct so far)

here is where i am confused i want to swap hard drives to a wd250 (checked it was compatable), should i swap before i flash the chip or should i wait and make sure everything works correctly.

my next q's is regarding auto installers should i use one of these that includes a bios, dashboard and what not or should i do it a piece at a time. I also have a linux disc from smartxx, is this compatable.

i would also like to hook a keyboard and mouse to my xbox i have a magi box xfps will this work.

thanx and i apologize in advance for wasting your time.
 

cameljuice

Noob Account
Feb 20, 2007
3
0
can xbmc support drives over 137+ or would i be better off using evox/evolutionx

the addapter that i have plugs into one of the controller ports and takes ps2 connections, like old still pc keyboard/mouse
 

cameljuice

Noob Account
Feb 20, 2007
3
0
ok thanx for the info i figured it out here some other things i figured out in the process of this mod.

1. always check your soldering no matter how good a job you think you did. and double check, check the whole board.

2.never,ever,ever,ever,ever try to flash bios with a cd/dvd, when you can ftp the box, tried for hours to make a disc work gave up and tried ftp took about a minute.

3. AID kicks ass makes things real easy replaced my harddrive with a WD250 with out a problem, without pc.(i didnt care about my game saves) however i did backup my old hard drive just in case.

4. Should be #1 but read this site over and over, but keep your info straight cause it gets confusing.


thanx to DJ for the help