LITEON 74850 Help me pls

[Sparksy35]

Hi guys
Right I flashed phats using ck3 mini with on sata before, got my own at Xmas and went for it. Jf recognised, I probed using probe 3, key extracted, power cycle to complete process. Jf froze pc. No key saved, err 64 from xbox. So I purchased via chipset installed and removed the correct drivers and jf won't detect my drive, and returning status 0xff is it stuck in vendor mode? Is there no firmware? Is my lite on bricked. Searched my forums to no avail...need some pro advice

 

[Martin C]

What dashboard are you on?

Have you checked the JF DVD key database?

 

[juanbrnt]

do you save the dummy file?

 

[jsinger47]

Does the drive still work inn the console?

In the case of a spelling error, I blame Tapatalk.

 

[juanbrnt]

depend on the dash .you can rgh the console to get you key back

 

[Sparksy35]

Lastest dash, key not in jf database, couldn't save key because pc froze during the power cycle so didn't get that far, it won't work in Xbox err 64. I haven't erased it because after it froze couldn't get jf to recognise drive. If I rgh it can't go on XML can I?

 

[Martin C]

Lastest dash, key not in jf database, couldn't save key because pc froze during the power cycle so didn't get that far, it won't work in Xbox err 64. I haven't erased it because after it froze couldn't get jf to recognise drive. If I rgh it can't go on XML can I?

As soon as the key is retrieved (and before you click liton-on erase), you get a pop up file browser to ask where you want dummy.bin saved to.

what happened to it?

 

[Sparksy35]

Needed to power cycle (5 seconds) to complete to process of dump, before asking where to save key.. That's when it froze..

 

[jsinger47]

You need you send the drive to a pro. Be it components or a mt chip swap, it is above your skill level.

In the case of a spelling error, I blame Tapatalk.

 

[Martin C]

Needed to power cycle (5 seconds) to complete to process of dump, before asking where to save key.. That's when it froze..

This action alone wouldn't have killed the drive.

It sounds like you probed the wrong point.

 

[Sparksy35]

Mt chip swap? Just so I know what service to search for...is that involving lifting the ic? Sorry for noob questions but we do need the help of you lot.

 

[jsinger47]

This action alone wouldn't have killed the drive.

It sounds like you probed the wrong point.

I have to agree. A slip of the hand and grounding the wrong point can definitely have dire consequences. Could also be plugging in upside down though.

In the case of a spelling error, I blame Tapatalk.

 

[juanbrnt]

Lastest dash, key not in jf database, couldn't save key because pc froze during the power cycle so didn't get that far, it won't work in Xbox err 64. I haven't erased it because after it froze couldn't get jf to recognise drive. If I rgh it can't go on XML can I?

yes you can go xbl you just have to get you key from xell then flash back to original. if the drive dead ?can you open and close the dvd tray?

 

[Sparksy35]

I probed mx01. Jf told me key extraction was good just froze before saving. Ima bit confused cos I didn't think it would kill it, because I couldn't erase it if I wanted to as jf wouldn't recognise it after.

---------- Post added at 16:51 ---------- Previous post was at 16:49 ----------

No cant open or close tray.

 

[Martin C]

I probed mx01. Jf told me key extraction was good just froze before saving.

JF will always report that at that stage, even if it fails the next (i.e you probed the wrong point).

 

[juanbrnt]

I probed mx01. Jf told me key extraction was good just froze before saving. Ima bit confused cos I didn't think it would kill it, because I couldn't erase it if I wanted to as jf wouldn't recognise it after.

---------- Post added at 16:51 ---------- Previous post was at 16:49 ----------

No cant open or close tray.

at this point depend on the dash i will send the board and dvd drive to a pro so they could extract the key from the mobo and flash the dvd drive with he right key