help my flashbios 3.0.0 wont flash

[jfreek82]

x3
flashbios 3.0.0

ive fallowed many tutorials and still same thing when i flash the bios everything seems fine it looks like its flashing but then when i turn it back on it just goes back to the flashbios screen ive been working at this for almost 3 days strait and stil no progress i know my post is kinda vage but i could realy use some help

 

[Martin C]

"i know my post is kinda vage"

You said it!

Read my sig and post again please.

Martin

 

[jfreek82]

ok im not shure what you mean by sig but ill do my best,

i just bought the x3
no problems with the sodering of the chip
next step is to flash the bios corect? i flip the 1,2 banks on and begain to load bios from disk. i made the disk using nero 6 and a tutorial i found on xbox-scene i used the dummyfile and flashbios_v303 (renamed to bios.bin) when i stat the flash everything seems to do what its suposed to do then the xbox shuts off (like it should) then when i turn it back on it just starts rite back to the origanal screen of "FLASHBIOS 3.0.0" insted of the x-box screen saying xecutor ROX MY BOX

is this beter
help what am i doing wrong?

 

[Martin C]

"i used the dummyfile and flashbios_v303 (renamed to bios.bin) when i stat the flash everything seems to do what its suposed to do then the xbox shuts off (like it should) then when i turn it back on it just starts rite back to the origanal screen of "FLASHBIOS 3.0.0""

Please, read the FAQs

http://www.teamxecuter.com/index.php?name=FAQ&id_cat=5

Then read the tutorials - there's a great noob guide here:

http://home.comcast.net/~x3guide/

Once you done reading, you can come back here and thank me

I know you haven't read any of the FAQs or tutorials, as you wouldn't be posting.

Martin

 

[shagga]

You need to pay particular attention to the difference between the Flasbios and the X3 bios. I've got all the kit to mod my xbox at xmas but I'm still spending every waking hour reading through information to understand exactly what I need to do. I suggest you do the same then you would know the answer to the question you asked.

 

[burkek]

3 RROD FIX

Hi,

Been trying to fix a 3 rrod 360 but still getting them after the fix and tried different tensions with the screws but still no result! Thinking about changing the GPU on this model which is a 2006 model but not sure whether to go for a 65nm or 90nm GPU. Anyone know which one to go for?

 

[Cyberpit]

Re: 3 RROD FIX

whats the secondary error code? You can't simply change the GPU for different one, it has to be the same type. And to be honest if you are abel to change the GPU then that mean's you can reball right?