FIXED Help Needed With Demon Slim

[aids76]

Hello all !

Im stuck with demon and slim and got no ideas how to go next.
Situation : I have glitched console,got cpu key and everything. If i write to onboard nand everything is working np. If its stock is ok,rgh ok. So all ok with the system. Installed demon,retail nand ok. I can write,read etc.. from demon. Generete hacked nand for demon and write to it,all ok. Problem is everytime when i plug the power supply to xbox,starts by itself to hacked nand on demon. Xbox is glitching and all,when glitch get rol and picture on tv,but sec after that i got red dot. On tv system error E71 ! Cant get past this error. I tried to write retail nand on demon,disable coolrunner,again red dot with e71.
I went through all points with multimeter and onboard nand,all connections go through right.
I think my demon is mulfunction.
Does anybody have similiar problem ? Any help would be greatfull as im losing my mind about it.

Im attaching pictures of install.

Thanks and regards













---------- Post added at 14:57 ---------- Previous post was at 14:53 ----------

Forget to metion,i can glitch to xell. No error.

 

[Martin C]

disconnect the RoL board and see whether it's still starting up by itself.

Also, flash your stock NAND to the DemoN - this will test whether the demon is booting ok.

E71 is normally bad block related - post your J-R log please.

 

[aids76]

Thanks Martin.I remove rol board. Not starting by power plugin. Wrote original nand to demon, E71 just like with hacked image.

So my guess DEMON. If i wrote hacked image to onboard nand,everthing is working. RGH boots fine.


J-Runner log
===================================================
16. avgust 2012 17:26:08

J-Runner v0.2 Beta (279) Started



Checking Files
Finished Checking Files
Initializing Nand..
Nand Initialization Finished
Checking for bad blocks...
Done
Initializing Nand..
Nand Initialization Finished
Comparing...
Bad Block ID @ 0x01F5 [Offset: 0x812A00]
Bad Block ID 01F5 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 01F5 [Offset: 0x812A00]
Bad Blocks Remapped
Bad Block ID @ 0x01F5 [Offset: 0x812A00]
Bad Block ID 01F5 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 01F5 [Offset: 0x812A00]
Bad Blocks Remapped
Nands are the same
Checking for bad blocks...
Done
Initializing Nand..
CpuKey is Correct
Added Key to Database
Nand Initialization Finished
Using edited settings
Load Files Initiliazation Finished
15574
Started Creation of the 15574 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.04.515
---------------------------------------------------------------
building glitch2 image
---------------------------------------------------------------
C:\Users\Desktop\J-Runner\138440113009\updflash.bin image built, info:
---------------------------------------------------------------
Console : Trinity
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with IR guide/X button
Serial : 138440113009
ConsoleId : 320573273361
MoboSerial: 9948655106071309
Mfg Date : 07/21/2011
CPU Key : 6327680D9C6618F9B36A2D6E0E47FEBB
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 7E2F76E634F6BEB9071F82C1C493AB4F
CF LDV : 3
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

Image is Ready

 

[Martin C]

Have you tried building a 'noremap' image and writing that to the DemoN instead? Remember bad blocks reported are on the stock NAND. You won't need to remap them on the DemoN NAND.

 

[aids76]

Martin : THANK YOUUUUUU,VERY MUCH !!! You Save me ) I did image with noremap BB,bumm it glitched and no red dot !!! )) I would never remember that !

Regards !

 

[Martin C]

No worries

And thanks for providing good quality images, as it helped massively to identify the problem!

Nice soldering too!