LITEON DG-16D4S - SLIM Help needed with flashing

[coltam]

My setup:
Xbox slim
Dash:13599
DVD:Liteon DG-16D4S 9504 (0272 fw due to update) Winbond Chipset(Locked)

Connectivity Kit:
X360USB PRO
CK3 pro

Installing Liteon DG-16D4S pcb (MCIX chipset and Sputnik360 switch installed)

I recently wanted to flash my drive but ofter reading through the forums saw thats its only possible to do so if i havent updated to the new dash or the kamakazi hack( which i am not experienced to do).

so i decided to look around the ad section in this forum and found the same pcb that i have except it has a MCIX chipset with a SputNik360 installed already.

I have made a dummy.bin of my original drive using jf, i have been looking around the forum for a guide.

Im not 100% sure what to do next , how to go about flashing the new board , which firmware to use (Lt+ etc...)

Im new to this all so would rather ask for some advise before i do some damage

 

[Rome 16:16]

Windbond chips can be unlocked thru the kamikaze, the tx custom pcb or the pro modders kit. MXIC can be unlocked thru sputnik360switch or the MXprobe. LT+1.92 is the latest fw for slims.

 

[coltam]

Yeah i read up about all that, im wanting to install the pcb i bought and need to know how to i go about flashing it

 

[kukuku]

Jus follow this tut - http://www.team-xecuter.com/forums/showthread.php?t=67582

 

[coltam]

Ok so i save my ofw from my current dvd drive using jf once thats done swop the pcb around and flash my ofw on the new pcb. after that load LT+ 1.92?

 

[kukuku]

you do not need to load your ofw... just load LT+ 1.92 with you DVD key....

step by step on tut