Help Needed..?

ARUNCREATIONS

VIP Member
Oct 1, 2010
195
23
INCREDIBLE INDIA
www.facebook.com
Hi
I just rgh a jasper 16mb sb(elite) successfully. I got CPU key and made a glitch image for 14719 and got boots instant but my problem is after loading i got e71 error.
I also found that was due to dashboard update error but i cant solve it by trying to update with ms 14719 update.

So i re flash to og nand and found it was 13599 dash then updated it to 14699 and it boot fine

My question is now i want to RGH again..for this

1. Shall i build a 14719 glitch image with 1 increment of ldv and flash it to board with my already dumped nand and cpu key or i have to dump again the nand and create ecc then boot into xell after that do as usual ?
Help needed ...
 

AMIT

VIP Member
Nov 30, 2011
943
68
INDIA
Hi
I just rgh a jasper 16mb sb(elite) successfully. I got CPU key and made a glitch image for 14719 and got boots instant but my problem is after loading i got e71 error.
I also found that was due to dashboard update error but i cant solve it by trying to update with ms 14719 update.

So i re flash to og nand and found it was 13599 dash then updated it to 14699 and it boot fine

My question is now i want to RGH again..for this

1. Shall i build a 14719 glitch image with 1 increment of ldv and flash it to board with my already dumped nand and cpu key or i have to dump again the nand and create ecc then boot into xell after that do as usual ?
Help needed ...
just use your first nand dump !
write xell and find the LDV ,i'm sure it's now changed caused by the update .
Match your LDVs when building a glitch image !
 
Last edited:

big_ted

VIP Member
Dec 31, 2003
766
48
Midlands UK
you updated, so the ldv will be +1, you can still use original dump but +1 on the ldv, best bet would be do another dump and run it through jrunner as you have the cpu key.

Also E71 can be caused at boot if you have usb plugged in with a .xex in the root

Ted