ANSWERED Help Please!

[Jtagy]

Okay have the Xenon motherboard I have the Nand X usb and the light isnt green I need help setting it up I believe all of my solder points are good. Does the solder have to be all the way in the holes?

 

[mespo365]

Post your pics of your soldering here. Do you have the drivers installed?

 

[Jtagy]

I have the drivers installed like it comes up as an nand x usb thing and everything like I followed the picture of soldering and everything can you give me like steps on how to install the driver right I believe I did that the color on my nand x is red and amber does that mean the solder isnt good? like do they have to be in the hole or whatever?

 

[mespo365]

Post pics of your soldering. We cant help and tell you if there is a problem without seeing

As for the lights red is power and amber is standby(which is what you want now). The drivers dont have to be reinstalled if it shows up as nandx you are good.

You can try taking a nand dump now. It will fail if your soldering is incorrect. Just follow one of the many tutorials here.

 

[Jtagy]

haha how should I do a nand dump in jtag tools like is it check cb? sorry I dont like the new one

---------- Post added at 02:29 ---------- Previous post was at 02:28 ----------

i am going to resolder the points and them them better and then ill upload a picture and all sound good

 

[mespo365]

here is a tutorial for jtag tool. If the soldering is good no need to resolder

http://www.team-xecuter.com/forums/showthread.php?t=62715

 

[Jtagy]

I have been getting this a lot looking for usb interface device
can not continue
press any key to continue

 

[mespo365]

Another tut. Are you jtagging or rgh btw?

http://www.team-xecuter.com/forums/showthread.php?t=75945&highlight=jtag+tool+tutorial

---------- Post added at 00:34 ---------- Previous post was at 00:34 ----------

I have been getting this a lot looking for usb interface device
can not continue
press any key to continue

bad soldering, post pics

 

[Jtagy]

---------- Post added at 02:51 ---------- Previous post was at 02:50 ----------

Now I am about to solder the nand x now and i filled in them holes ha sorry for the bad pictures

---------- Post added at 02:52 ---------- Previous post was at 02:51 ----------

Jtag

 

[mespo365]

Link To Image


Link To Image

---------- Post added at 02:51 ---------- Previous post was at 02:50 ----------

Now I am about to solder the nand x now and i filled in them holes ha sorry for the bad pictures

---------- Post added at 02:52 ---------- Previous post was at 02:51 ----------

Jtag

Yea bad pics lol, any chance you could get more light in them? From what I can tell it looks good. Lets see your nand wires now

Deff more solder will help lol

 

[Jtagy]

if it says that it can not continue is it because of the jtag solder or the nand solder

 

[mespo365]

if it says that it can not continue is it because of the jtag solder or the nand solder

what are you attempting to do? post pics of your nand install. Post better pics too. I cant help if I cant see

 

[Jtagy]

---------- Post added at 03:41 ---------- Previous post was at 03:38 ----------

I am trying to jtag my xenon motherboard. lol

 

[Jtagy]

I have it just plugged in but no power when I try to read my nand right

 

[frazzeld]

How have connected the nandx cable to that other cable you have soldered onto the motherboard?

Why dont you solder the original nandx cable to the board instead?

 

[bandit123]

How come the black wires loop back round and are soldered to the motherboard
These are supposed to go to the nand x

Using other cables aint a good idea really just use the wires that came with the nand x
Hopefully u pull this off without killing the xbox

 

[Jtagy]

you mean killing myself... haha