LITEON 0225 Help plz of 0225 drive

[chuckyblack]

i have xbox360 slim with 9504 drive but the firmware number when i connected to jungle is 0225 its ok for now... i flash the drive as 0225 number with LT 2.0 and when i try it i have some times play dvd error message then i think if there is a solutions of this?? i changed the number of firmware to 0227 to be like the original drive sticker but the problem is coming bigger and now no cds is working even originals and the big problem is i dont have 0225 original FW!!!! just i have the 0227 now with original key... the question is ??? if there is a way to change FW 0227 to 0225 to make me return play originals At least??? if i can plz let me know plz plz plz



Thank u So much

 

[FlashDrive360]

you need to manually load the lt+ 2.0 0225u as this is for mislabelled 9504 drives, dont forget to manul spoof key

 

[chuckyblack]

thanks for your help but can u explain more for me?
i have only 0227 dummy file and i need to change it to 0225 and make the key is same!!!

---------- Post added at 08:05 ---------- Previous post was at 08:01 ----------

you need to manually load the lt+ 2.0 0225u as this is for mislabelled 9504 drives, dont forget to manul spoof key

plz can u explain more for me !!!
how i can change 0227 to 0225 dummy file ???

 

[afsilver]

if your dummy is 0272 then you do not have a mislabelled 0225!! you need to flash with LTPlus-0272-v2.0.bin !!

edit: read OP a bit more thoroughly and most likley you have a mislabeld 9504! but there is no such FW as 0227!!

load your dummy as source then load LTPlus-0225-v2.0u.bin as target and click "spoof source to target" and FW should be good to flash!

 

[chuckyblack]

if your dummy is 0272 then you do not have a mislabelled 0225!! you need to flash with LTPlus-0272-v2.0.bin !!

edit: read OP a bit more thoroughly and most likley you have a mislabeld 9504! but there is no such FW as 0227!!

load your dummy as source then load LTPlus-0225-v2.0u.bin as target and click "spoof source to target" and FW should be good to flash!

Yes my friend thanks for your help but when i use my dummy 0227 as source and make 0225 as target... jungle not complete flashing not authorized at last even if i click spoofing... key didn't write on to 0225 FW THAT'S MY PROBLEM

 

[majesstik]

what are you using to disable wp

 

[bglumac]

Yes my friend thanks for your help but when i use my dummy 0227 as source and make 0225 as target... jungle not complete flashing not authorized at last even if i click spoofing... key didn't write on to 0225 FW THAT'S MY PROBLEM

1. click "open Source Firmware" and load the 0227 dummy
2. click "NO" when jf asks you if you want to auto load
3. click "save drive key"
3. click "open taret Firmware" and load the 0225 LT2.0
4. click "Manual spoofing"
4.1 click "Load key.bin"
4.2 under "Spoofed as" enter "PLDS DG-16D4S 0225"
5. click "save to file"

Now if the JF gives you an error wile trying to write because it's spoofed FW just exit the jf.
Open the JF again, load the saved custom 0225 firmware in the "open target Firmware" dialog and then write

 

[chuckyblack]

1. click "open Source Firmware" and load the 0227 dummy
2. click "NO" when jf asks you if you want to auto load
3. click "save drive key"
3. click "open taret Firmware" and load the 0225 LT2.0
4. click "Manual spoofing"
4.1 click "Load key.bin"
4.2 under "Spoofed as" enter "PLDS DG-16D4S 0225"
5. click "save to file"

Now if the JF gives you an error wile trying to write because it's spoofed FW just exit the jf.
Open the JF again, load the saved custom 0225 firmware in the "open target Firmware" dialog and then write

Thanks for your help,,,, but under spoofed as !! i dont have PLDS DG-16D4S 0225 choice i`m using JF 1.89

 

[x360ccm]

you load your orig dummy into source.if it says it's a 0225 drive then you load the LTPlus-0225-v2.0u into target.

click the spoof source to target tab.

make sure the key is the same.then write to drive.

post your jf log.

 

[chuckyblack]

you load your orig dummy into source.if it says it's a 0225 drive then you load the LTPlus-0225-v2.0u into target.

click the spoof source to target tab.

make sure the key is the same.then write to drive.

post your jf log.

i Dont have 0225 orig dummy i have only key.bin

here my log :
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Sending Spi UnLock request to Port 0x0000
................................................
Spi Status: 0x00
Sending Vendor Intro to port 0x0000

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Loading firmware file C:\Users\Yaser\Desktop\New folder (4)\Dummy.bin
MD5 hash: 3df118fe5a40b0da81db02792ec73f16
Inquiry string found
Identify string found
Drive key @ 0xA030 13A52E66B17F93BC819EEE2F6A86D4F5
Firmware Osig: [PLDS DG-16D4S 9504]
Firmware is: SlimKey Extract
Loading firmware file C:\Users\Yaser\Desktop\JungleFlasher.0.1.89.Beta-284-\JungleFlasher v0.1.89 Beta (284)\firmware\LTPlus-0225-v2.0u.bin
MD5 hash: a28aa0c2386925550f05b4b5af62d81b
Genuine LT plus v2.0 (9504 upgrade)
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 2.0
DVD Key copied to target
Target is LT - ID strings not copied to Target

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 3861mS

Write verified OK !

Restoring sector 0x3E000.

Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorisation Failed!
Restore Verify Failed !

 

[x360ccm]

it says
Firmware Osig: [PLDS DG-16D4S 9504]
Firmware is: SlimKey Extract

so why are you wantin to load it as a 0225

load your orig dummy into source.click no to auto load lt plus.

then load the LTPlus-0272-v2.0 into target

click the spoof source to target tab.

make sure the key in source is the same in target

then write to your drive

post ur jf log once you done that.

 

[chuckyblack]

i cant write my key to 0225 firmware. its supposedly impossible to "spoof" it into the slim firmware Uber says yet I can do it with 9504, 0227 but this will not work on my xbox i need 0225 with my key.... just i have key.bin file ...

---------- Post added at 05:56 ---------- Previous post was at 05:52 ----------

it says
Firmware Osig: [PLDS DG-16D4S 9504]
Firmware is: SlimKey Extract

so why are you wantin to load it as a 0225

load your orig dummy into source.click no to auto load lt plus.

then load the LTPlus-0272-v2.0 into target

click the spoof source to target tab.

make sure the key in source is the same in target

then write to your drive

post ur jf log once you done that.

thanks man but my orig dummy it was 0225 and i dont have it just i have key.bin is there is a way to put my key on 0225fw???

 

[x360ccm]

i Dont have 0225 orig dummy i have only key.bin

here my log :
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Sending Spi UnLock request to Port 0x0000
................................................
Spi Status: 0x00
Sending Vendor Intro to port 0x0000

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Loading firmware file C:\Users\Yaser\Desktop\New folder (4)\Dummy.bin
MD5 hash: 3df118fe5a40b0da81db02792ec73f16
Inquiry string found
Identify string found
Drive key @ 0xA030 13A52E66B17F93BC819EEE2F6A86D4F5
Firmware Osig: [PLDS DG-16D4S 9504]
Firmware is: SlimKey Extract
Loading firmware file C:\Users\Yaser\Desktop\JungleFlasher.0.1.89.Beta-284-\JungleFlasher v0.1.89 Beta (284)\firmware\LTPlus-0225-v2.0u.bin
MD5 hash: a28aa0c2386925550f05b4b5af62d81b
Genuine LT plus v2.0 (9504 upgrade)
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 2.0
DVD Key copied to target
Target is LT - ID strings not copied to Target

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 3861mS

Write verified OK !

Restoring sector 0x3E000.

Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorisation Failed!
Restore Verify Failed !

is this your orig dummy file yes or no.

 

[chuckyblack]

is this your orig dummy file yes or no.

no this my key only and my orig dummy file it was 0225 and i don't have only 9504 can allow me to write my key but 0225 i cant write key ....

 

[x360ccm]

well you cant inject the key into 0225 fw.

what happend to your orig dummy file then.

did you do the kamikazi hack without getting your dummy first.

 

[chuckyblack]

no i got my dummy then i saved on my pc but my son is open the folder and delete files just he keep for me key.bin (((

 

[x360ccm]

unless theres away to get that dummy back.then there no hope of gettin your key into 0225 fw.

is it not in your recycle bin.

there must be some sort of program to get deleted files back..

 

[chuckyblack]

well you cant inject the key into 0225 fw.

what happend to your orig dummy file then.

did you do the kamikazi hack without getting your dummy first.

no i got my dummy then i saved on my pc but my son is open the folder and delete files just he keep for me key.bin (((

 

[bglumac]

So, you need 0225 CFW(LT+2.0) (if you need another drive cfw write it down) with your key from the Key.bin inserted ?
Send me your key.bin to my email (it's in you PM), I will try to insert it and send it back to you.

Then you load it as your target firmware and try to write to the drive.
If you fail to write it, copy the log from jf or exact error message, so we can try to fix it.
OK?

 

[x360ccm]

So, you need 0225 CFW(LT+2.0) (if you need another drive cfw write it down) with your key from the Key.bin inserted ?
Send me your key.bin to my email (it's in you PM), I will try to insert it and send it back to you.

Then you load it as your target firmware and try to write to the drive.
If you fail to write it, copy the log from jf or exact error message, so we can try to fix it.
OK?

you cant insert the key into 0225 fw.

unless you no a way of doing it.

then do share with others lol.