X360USB PRO help plz using x360usb with my xblaster ck3

[jasonvoak]

hi need help plz..
ive got a xbox elite jasper with a liton drive dg16d25 (74850c) i have the drive attached to a blaster ck3 that i brought but could not use as my brandnew pc had no card slot that i could plug a sata card into so i purchesed a 360usb the problam im having is that i cant plug my 360usb into the sata port on the front of the blaster when i do jf dosnt pick the drive up but if i open my xbox up and conect the 360sub directly to the drives sata slot on the back of the drive jf picks up the drive so what am i doing wrong with the blaster as i just want to conect the 360usb to to the blasters front sata slot so i dont have to keep opening my xbox up thats why i brought the blaster ck3 in the first place

thanks jason

windows 7 64 bit 4gig ram
xblasterck3 and x360usb pro
liton dg16d25 (fw 74850c)
lt 1.9

 

[Martin C]

Have you set the CK3 Blaster to the right mode prior to turning on the Xbox?

Check the guides to see proper usage.

If it's still not being picked up, check your install.

 

[jasonvoak]

hi martin i set it up exactly as the tut when flashing i set the switch to pc and the mode switch to off i turn it on (lights up green) when i press the eject button it does its job so asuming it can talk to the drive .. when i tried to flash my drive i conected the x360 to the front sata port on the front of the blaster and the usb on the 360usb to pc d/l all drivers updated fw to 18 when i tried to use it jf couldnt detect the drive so some1 helped and told me to conect the sata from the 360usb direct to the xbox drive i did this and flashed fine so know all is ok from the 360usb and pc jf ect

thanks jason

 

[Martin C]

It's possible you've not got one of the external wires connected correctly (the ones which you passed through the chassis). Either that or the switch/Blaster isn't doing as it's supposed to.