HELP..!! Post B3 - Panic - SHA_VERIFY

X

xxdylanxx

Full Member
Aug 28, 2010
30
6
philippines
dylan-jtag.webs.com
hello guys, i have this jasper 16 mb with bad block @e (xell block)
tried all dip settings this the closest i can get (tried all 1.2v 1.8v rater says more panic in all DIP settings, and i think this is the closest i can get but that Post B3 is preventing me to boot to xell)
stock voltage
7-8 on on
3 on

all other dip settings and voltage gets 3rl
i also changed the jtag QSB with the old school jtag dioded
i can still boot to stock
tried no remap check in advanced Xebuild option
tried reading block @E and manually relocate it to @3ff
advanced nand function in jrunner
tried alt CPU_RST
tried aud_clamp
330-470-and off
still same with jtag qsb
Post B3 is the one preventing me to boot

does the bad block have something to do with Post B3??
my solder is good will take pictures of it later and post it here

i also have other jasper that boots instantly DIP 7-8-2 on-on-on
stock voltage


IMG_1124.JPGIMG_1127.JPGIMG_1131.JPGIMG_1133.JPGIMG_1137.JPG

Code: 
===================================================Huwebes, Oktubre 24, 2013 12:13:39 PM


J-Runner v0.3 Beta (2) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Options.ini file was altered successfully
Use Edited Options Selected
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 6754
Jasper 16MB
Reading Nand to D:\xbox\J-Runner_0.3_b1\output\nanddump1.bin
Reading Nand
Error: 258 reading block E
Done!
in 3:21 min:sec


Reading Nand to D:\xbox\J-Runner_0.3_b1\output\nanddump2.bin
Initializing nanddump1.bin..
Jasper 16MB
Jtag Selected
Nand Initialization Finished
Reading Nand
Error: 258 reading block E
Done!
in 3:21 min:sec


Comparing...
Bad Block ID  000E Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 000E [Offset: 0x39C00]
Bad Blocks Remapped
Bad Block ID  000E Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 000E [Offset: 0x39C00]
Bad Blocks Remapped
Nands are the same
Aud_Clamp Selected
R-Jtag Selected
Aud_Clamp de-Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper.bin
Version: 10
Flash Config: 0x00023010
Writing Nand
jasper.bin
Error: 202 writing block E
Done!
in 0:18 min:sec





[CODE]Phat SelectedVersion: 10
Power Up
Waiting for POST to change
Post 82 - Panic - DATA_STORAGE 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post E2 
Post C2 - LZX_EXPAND_2 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post E0 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 78 - INIT_STFS_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 40 - Entrypoint of CD reached 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 12 - FSB_CONFIG_RX_STATE 
Post 18 - FETCH_CONTENTS 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 18 - FETCH_CONTENTS 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 49 - SHA_VERIFY 
Post B3 - Panic - SHA_VERIFY 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 15 - FETCH_OFFSET 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 18 - FETCH_CONTENTS 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post E0 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 12 - FSB_CONFIG_RX_STATE 
Post 18 - FETCH_CONTENTS 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 15 - FETCH_OFFSET 
Post 18 - FETCH_CONTENTS 
Most Fails(cumulative): 0xA0
Shutdown
Resetting................
 
Last edited:
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
You must log in or register to reply here.