Help!!! R-JTAG JASPER 16MB

DuarteRS · Jul 27, 2013

Regards,

I installed the "R-JTAG Ultimate" in "ELITE JASPER 16MB".

Settings used:
DIPS 2, 7, 8 = ON - 1.2V JUMPER ON - NO JTAG AUD_CLAMP OPTION - 330 JUMPER
Key Jumper "0-330/470-OFF" set to 0
The solder jumper Should be 2-1 for the option AUD_CLAMP
Alternate CPU_RST Point - R8C2

Download XELL

Recorded NAND - NO ERROR

After recording NAND boot with 3RLS.

What will happen??
Can anyone help me??

Sorry for the English Google translation.

Thank you!

SoulReaper223 · Jul 27, 2013

where your post?

DuarteRS · Jul 27, 2013

Brazil

SoulReaper223 said:
where your post?

xzanox · Jul 27, 2013

DuarteRS said:
Regards,

I installed the "R-JTAG Ultimate" in "ELITE JASPER 16MB".

Settings used:
DIPS 2, 7, 8 = ON - 1.2V JUMPER ON - NO JTAG AUD_CLAMP OPTION - 330 JUMPER
Key Jumper "0-330/470-OFF" set to 0
The solder jumper Should be 2-1 for the option AUD_CLAMP
Alternate CPU_RST Point - R8C2

Download XELL
View attachment 19204

Recorded NAND - NO ERROR
View attachment 19205

After recording NAND boot with 3RLS.

What will happen??
Can anyone help me??

Sorry for the English Google translation.

Thank you!

http://team-xecuter.com/forums/show...FOLLOW-THIS-BEFORE-ASKING-FOR-ANY-SUPPORT-***

You will be asked to fill in this template and provide pics of the install.

Originally posted by MartinC

ok - if you get RRoD from using the underside, try soldering the CPU_RST wire to the side of R8C2 facing the CPU (Resistor topside near the J8C1 header used for 'normal' RGH CPU_RST):

I used kynar wire from this point and put it over the fan shroud to the R-JTAG chip.

morinzo · Jul 27, 2013

Copied this from the guide.

The solder jumper should be 3-1 for the AUD_CLAMP option & you have soldered 2-1 for the option AUD_CLAMP.

Not sure how much it matters, i'm sure someone who knows more will inform you..

scott1503 · Jul 27, 2013

Put up some more pictures until we see them we can not help

DuarteRS · Jul 28, 2013

Anyone know how to repair the resistor R8C2.
Just destroy the resistor.
Trying soldering the CPU_RST.
Can I replace that resistor??
:frown::frown::facepalm::facepalm:

Resitor damaged

socalbill · Jul 28, 2013

just use the cpu reset point underneath as in the guide, that resistor isn't needed

if the pad that is closer to the cpu is grounded out, you'll have to clear it, or you'll get 0022

DuarteRS · Jul 28, 2013

Thank you!
Did not happend anymore 3RLS.
Initializes collers. But then turns off.

socalbill said:
just use the cpu reset point underneath as in the guide, that resistor isn't needed

if the pad that is closer to the cpu is grounded out, you'll have to clear it, or you'll get 0022

briggs01 · Jul 28, 2013

DuarteRS said:
Thank you!
Did not happend anymore 3RLS.
Initializes collers. But then turns off.

as stated before you need to post pics upof all your solder points /qsb/aud clamp etc , if you are using uad clamp you should have 3-1 jumper soldered not 2-1

DuarteRS · Jul 28, 2013

briggs01 said:
as stated before you need to post pics upof all your solder points /qsb/aud clamp etc , if you are using uad clamp you should have 3-1 jumper soldered not 2-1

The situation is critical.... every time worst...
Now ... The lights of the "RING" and "ON" not light ...

I am very grateful for the help.

[video=youtube_share;eSn1AcHOMvs]http://youtu.be/eSn1AcHOMvs[/video]

DreamZ · Jul 28, 2013

Looks like youve disturbed the resistor for rol alternative on the jtag qsb. Will need to fix that

DuarteRS · Jul 28, 2013

My Log... Please Help...

Version: 10
Power Up
Waiting for POST to change
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FD
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FE
Post FC
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post 80
Post 12 - FSB_CONFIG_RX_STATE
Post 15 - FETCH_OFFSET
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 04
Post FC
Post FD
Post CC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post FE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 80
Post 84 - Panic - INSTRUCTION_STORAGE
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 70 - INIT_VIDEO_DRIVER
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post FC
Post 80
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 18 - FETCH_CONTENTS
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post C0
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 04
Post FD
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 80
Post FD
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FD
Post 15 - FETCH_OFFSET
Post 18 - FETCH_CONTENTS
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post FC
Post 04
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post 80
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 04
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 04
Post 84 - Panic - INSTRUCTION_STORAGE
Post 04
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 2E - HWINIT
Post 31 - FETCH_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 42 - FETCH_HEADER
Shutdown

DreamZ · Jul 28, 2013

What dips do you currently have set atm?

And can you take a clear shot of the jtag qsb. Your rol isnt working due to that.

And your post out is funky..

What dips currently on?

scott1503 · Jul 28, 2013

DuarteRS said:
My Log... Please Help...

View attachment 19216

Version: 10
Power Up
Waiting for POST to change
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 18 - FETCH_CONTENTS
Post 38 - SIG_VERIFY_4BL_CD
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 78 - INIT_STFS_DRIVER
Post 48 - SHA_COMPUTE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FD
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FE
Post FC
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post 80
Post 12 - FSB_CONFIG_RX_STATE
Post 15 - FETCH_OFFSET
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 04
Post FC
Post FD
Post CC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post FE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 80
Post 84 - Panic - INSTRUCTION_STORAGE
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 70 - INIT_VIDEO_DRIVER
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post FC
Post 80
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 18 - FETCH_CONTENTS
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post C0
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 04
Post FD
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 80
Post FD
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post FD
Post 15 - FETCH_OFFSET
Post 18 - FETCH_CONTENTS
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post FC
Post 04
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post 80
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 84 - Panic - INSTRUCTION_STORAGE
Post 04
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 04
Post 84 - Panic - INSTRUCTION_STORAGE
Post 04
Post C4 - LZX_EXPAND_4
Post 84 - Panic - INSTRUCTION_STORAGE
Post FC
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 2E - HWINIT
Post 31 - FETCH_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 42 - FETCH_HEADER
Shutdown

Don't know if it makes any difference but try setting to phat before running rater and not slim

JohnWestBear · Jul 29, 2013

Apologies to Mini mod Hershey's. Removed to appease the masses.

hersheys247 · Jul 29, 2013

JohnWestBear said:
Still not fixed that one we had. Ended up giving it to Danny to practise on! Haha

I don't understand relevance of this post to OP?

Sent from my Brain Tumor causing device using Tapatalk 2

xzanox · Jul 29, 2013

hersheys247 said:
I don't understand relevance of this post to OP?

Sent from my Brain Tumor causing device using Tapatalk 2

Sometimes the relevance of things is not relevant...... Must be a inside thing they have, don't worry lol.

DreamZ · Jul 29, 2013

This needs to be given to someone to sort / finish imo.

You damaged the ROL resistor somehow, destroyed cpurst resistor and have no knowledge of the entire process.

Poor jasper... R.I.p

DuarteRS · Jul 29, 2013

DreamZ said:
This needs to be given to someone to sort / finish imo.

You damaged the ROL resistor somehow, destroyed cpurst resistor and have no knowledge of the entire process.

Poor jasper... R.I.p

Yes, I killed my XBOX JASPER...
Can close the topic.
Thank you!

Search

Search

Help!!! R-JTAG JASPER 16MB

DuarteRS

Noob Account

SoulReaper223

BANNED

DuarteRS

Noob Account

xzanox

morinzo

scott1503

DuarteRS

Noob Account

socalbill

DuarteRS

Noob Account

briggs01

DuarteRS

Noob Account

DreamZ

DuarteRS

Noob Account

DreamZ

scott1503

JohnWestBear

hersheys247

xzanox

DreamZ

DuarteRS

Noob Account