help R/W nands

[asusandrea]

Hello Guys this is my story:
I cercandi to do RGH on a trinity with 360 squirt, I read everything with cpu key DGX having a dash 16202 by mounting the chip did not withdraw the xbox, turn it on only the fan and enough video off and green LED chip lampegiante ,
so I unplugged the power to the chip and tried to replace the nand I had read the first time me written autoagg 0.8'm going to start the xbox but nothing not turn on the fan even now, only a beep in the console without even the central LED green, try again to put the nand that I read at the beginning but now he says the operation is completed autoagg but the process does not happen Writing to success and how can I fix that please and urgent


llego via the various photos of the various procedures ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
aspect of your suggestions
this is the message that I get from squirter

with power supply disconnected:
Flash Config: 0xffffffff
BAD CONNECTION TO NAND

powered on:
Flash Config: 00000000
BAD CONNECTION TO NAND

I also tried on another trinity and I do everything to perfection (read NAND)

http://i48.tinypic.com/mt8g0i.jpg
here I redid all dinuovo but does the same thing

 

[nofeloniesyet]

Hello Guys this is my story:
I cercandi to do RGH on a trinity with 360 squirt, I read everything with cpu key DGX having a dash 16202 by mounting the chip did not withdraw the xbox, turn it on only the fan and enough video off and green LED chip lampegiante ,
so I unplugged the power to the chip and tried to replace the nand I had read the first time me written autoagg 0.8'm going to start the xbox but nothing not turn on the fan even now, only a beep in the console without even the central LED green, try again to put the nand that I read at the beginning but now he says the operation is completed autoagg but the process does not happen Writing to success and how can I fix that please and urgent


llego via the various photos of the various procedures ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
aspect of your suggestions
this is the message that I get from squirter

with power supply disconnected:
Flash Config: 0xffffffff
BAD CONNECTION TO NAND

powered on:
Flash Config: 00000000
BAD CONNECTION TO NAND

I also tried on another trinity and I do everything to perfection (read NAND)

http://i48.tinypic.com/mt8g0i.jpg
here I redid all dinuovo but does the same thing

your problem lies in reading/writing to the nand,and your not using xecuter products to perform this,so we cannot help you,try squirt forums.

 

[asusandrea]

Which product should I appear to be able to read and write the nand, which I consiglite?
say that I fix this?